Falper Minimum Cabinet 1 Drawer And Wall-mounted Washbasin 60-160cm H36cm
MINIMUM CABINET 1 DRAWER AND WALL
MINIMUM CABINET 1 DRAWER AND WALL-MOUNTED WASHBASIN
Cabinet 1 drawer and wall-mounted washbasin with built-in countertop L 60-160cm H36cm
Wall-mounted bathroom cabinet with drawer, width 60cm to 160cm and height 36cm. Minimum model wall-mounted washbasin with built-in countertop on the left side, width 80cm, depth 45cm and height 36cm.
Washbasin available in concrete and marble with drain cover in the same finish. Unit with 45° finishes on front and body. Drawers are fully extractable and available with optional groove handle or press-and-open handles.
INFORMATION
BRAND
Falper
PRODUCT TYPE
Washbasin
HANDLES
Fronts with optional push, groove or press-and-open handles.
ADJUST
Adjustable high capacity wall connections with scratch-proof safety system.
BASE
Bases for overlying washbasins with wooden or marble top, bevelling included in the cost of the base.
SIDES
Bases with a 45° fronts and sides.
FINISH
Interior unit parts with Exclusive matt grey finishing
DRAWERS
Blum Legrabox drawers with built-in stabilisers (over
L 90 cm) and soft close. Exclusive Grey Finishing.
AVAILABLE
Washbasins available in concrete and marble. Interior unit parts with Exclusive matt grey finishing.
INSTALLATION
- Installation-ready for STANDARD drain-trap included
- Installation-ready for VIEGA drain-trap included upon request
DESIGN
Victor Vasilev
DOWNLOADS
↓ Technical Data
↓ Technical Drawing
DRAWERS
-Optional on request – cat. 2 wood finishes can be requested with continuous grain (in marble) –Optional on request – Swiss electrical socket + 2 USB sockets with Cabling or two Swiss electrical sockets, which can be positioned on lower drawers (max. L. 90) on the right or left.
DIMENSIONS
- Width : 60/80/100/120/140/160 cm
- Height : 36 cm
- Depth : 45 cm
BASIC CEMENT FEATURES
High-performance, washable product made from a mixture of cement, selected inert materials and specific additives with class A1 fire resistance, coloured in paste form with iron oxides, used to produce products with a textured appearance. The colouring appears as a pleasant discolouration between products of the same colour: this is a peculiar characteristic of cement as a natural material that must be taken into account much like the presence of small surface micro-holes.
COLORS
BODY
FEATURES
FEATURES
CARE & MAINTENANCE
LACQUERED PRODUCTS
Clean with a damp cloth; for more thorough cleaning, add liquid detergents to water, rinse with water and dry with a soft cloth. Do not use abrasive products or products containing chlorine or acetone.
WOOD FINISHING
Clean with a damp cloth; for deeper-down cleaning use solvent-free glass cleaning products and dry thoroughly with a soft cloth. Do not use abrasive products or products containing chlorine, solvents or acetone. Important: paints used for wood are waterproofed, anti-yellowing and should not be scratched or subjected to high temperatures. Do not use furniture wax. Remember that even after finishing, wood behaves like a natural material and remains sensitive to heat and humidity. Avoid standing water by drying wooden parts after each use.
CRISTALPLANT BIO ACTIVE®
Clean with soapy water or common detergents to remove most of the stains and dirt that can deposit on the surface using a soft sponge or microfiber cloth. In particular, gel, liquid or spray detergents used with a soft cloth are recommended, taking care to rinse and dry the surface well to avoid the accumulation of dirt and limescale.
For detergents whose potential aggressiveness is unknown, it is advisable to carry out an application test in a small area that is not visible before using the product. After cleaning, rinse immediately and dry the surface well to avoid the formation of halos.
The surface has a good resistance to stains in general; nevertheless, contact with aggressive chemicals such as: acetone, ethyl alcohol, trielina, strong acids or bases, thinners, degreasers, products to unblock drains, abrasive cleaners should be avoided. Avoid contact with highly coloring substances such as ink, cosmetics and dyes.
Avoid prolonged contact with surface cleaners. Do not use metal scrapers, iron brushes, blades, cutter or other tools; also avoid the use of abrasive detergents with micro granules, abrasive sponges and abrasive paper that can scratch the surface. Avoid bumps and falling objects.
Avoid thermal stress of the product: do not use boiling water (above 55 ° C-130 ° F) and do not pour hot oils and liquids on the surface. Do not place hot objects, cigarettes or open flames on the surface. Do not use direct hot steam to clean the surface.