Fischer FCS Can Resin System
FCS CAN RESIN SYSTEM
FCS CAN RESIN SYSTEM
The epoxy resin for repair work
The fischer Can System FCS is an epoxy resin system in a can. The system is ideal for filling holes and gaps in concrete and concrete-like surfaces or for reconstructing broken corners and edges.
It has a high bond strength and a low shrinkage value. This guarantees a high quality of finish. FCS is a paste-like substance for applications to walls and ceilings, which is applied with a spatula. The FCS Liquid variant is liquid, can be ideally applied to the floor using a paintbrush or poured into holes and gaps.
INFORMATION
AMOUNT
1 pcs.
SHRINKAGE
< 0.1 %
DENSITY
1.7 – 1.9 g/cm3
TYPOLOGY
Resin System
BRAND
Fischer
GTIN (EAN-CODE)
4006209436769
BUILDING MATERIAL
Concrete
WATER ABSORPTION
< 0.5 % after 28 d immersion
WATER RESISTANCE
Resistant
CLEANING AGENTS
1% tenside solution no effects
TEMPERATURE RESISTANCE
120 °C
ADVANTAGES
- The FCS based on epoxy resin has a high bond strength and a low shrinkage value. This guarantees a high performance and opens up a wide range of applications.
- The two product variants, FCS Liquid (low viscosity = liquid) and FCS (high viscosity = paste-like), allow for use both in horizontal situations and on walls and ceilings. Therefore, there is always the right product for every occasion.
APPLICATIONS
- Filling holes and cracks in concrete and similar surfaces
- Reconstructing chipped corners and edges
UV-RESISTANCE (SUNLIGHT)
Not Resistant
PRODUCTION
Made in Italy
FUNCTIONALITY
- The resin and hardener are stored in two separate containers.
- The hardener is added to the resin and mixed thoroughly until the material is the same colour throughout.
- Note: The quality of the mixing of components and the proper filling of the holes (without air pockets) has an effect on the load-bearing capacity of the system!
- FCS Liquid can be poured into holes or cracks, or applied using a brush.
- FCS can be applied with a palette knife.
- Once mixed, the material can be used until the maximum open time is reached.