Fischer Epoxy Mortar Fis Eb Collection

The fischer injection mortar FIS EB is an economical epoxy resin mortar for standard applications in cracked and and non-cracked concrete and for rebar connections.

The FIS EB can be used in dry or wet concrete, but also in water-filled drill holes. This makes the epoxy resin mortar a secure and reliable system even in unfavourable conditions.

PACKAGING 

- Fis Eb 585 S : Cartridge
- Fis Eb 390 S In Bucket : Bucket

BUILDING MATERIALS 

Approved For Anchorings In : Concrete C20/20 To C50/60, Cracked And Non-cracked

ADVANTAGES 

- FIS EB is approved for post-installed rebar connections according to ETA and for use in cracked concrete according to ETA and ICC.
- The injection mortar achieves a reliable performance in many applications which enables economical use.
- FIS EB can be used under various installation conditions and is approved for seismic applications, making it a safe system.
- Variable anchorage depths allow ideal adaptation to the load to be transmitted.

FUNCTIONALITY 

- The epoxy mortar FIS EB combined with the threaded rod FIS A is suitable for pre-positioned and push-through installation.
- Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the injection capsule in the static mixer.
- The mortar is injected bubble-free from the drill hole base.
- The mortar bonds the entire surface of the threaded rod with the drill hole wall and seals off the drill hole.
- The threaded rod is set manually by slightly rotating it until it reached the drill hole base.

-During push-through installation, the annular gap between the threaded rod and the attachment is filled with FIS EB.

APPLICATIONS 

- Heavy Steel Constructions
- Consoles
- Silo Installations
- Tall Shelving
- Post-installed Rebar Connections

DOWNLOADS