Devon&devon Holiday Bathtub
HOLIDAY BATHTUB
HOLIDAY BATHTUB
A new concept of the bathtub
Devon&Devon and one of the most important architecture firm in the world join forces to create Holiday, the modular bathtub in White Tec Plus that is truly one of a kind.
Its design, a product of the clever interplay between the perfect interlocking elements that make up its frame, offers a contemporary interpretation of sophisticated Art Déco inspirations.
These are enriched by stylish details, such as the minimal white plinth, which can be covered in precious smooth or moulded gold Calacatta marble on request.
The taps can be installed on the edge of the bathtub, on the wall or on legs on the floor.
Surprisingly velvety to the touch, the body of the bathtub is made of White Tec Plus, an eco-sustainable, recyclable, and 100% restorable Greenguard Gold certified material.
INFORMATION
BRAND
Devon&devon
TYPOLOGY
Bathtub
MATERIAL
White Tec Plus
VOLUME
74 Gal (considering the capacity of the water to the overflow)
BATHTUB TOLERANCE
± 3/8”
PLINTH & MARBLE
Calacatta Oro
PRODUCTION
Made in Italy
FINISH
White Matt
WEIGHT
- Net Wight : 377 Lbs
- Gross Weight : 487 Lbs
DIMENSIONS
- Length : 175.7 cm
- Height : 66.5 cm
- Depth : 89.7 cm
WHITE TEC PLUS
White Tec Plus is an innovative composite material produced for Devon&Devon to the highest standards of quality and sustainability. Beautiful both to look at and to touch, its smooth surface is particularly pleasing to the touch due to its velvety finish, similar to that of natural stone.
Greenguard Gold certified, it is an eco-friendly, inert, hypo-allergenic, non-toxic, recyclable material. Made to last and to retain all its beauty intact over time, it can be fully restored: all you need to remove scratches and signs of wear is a detergent and an abrasive sponge.
Uniform throughout its thickness, it is compact and non-porous, and is therefore particularly easy to clean. It is flame retardant, has superb UV ray resistance and does not yellow over time.
Its excellence is the result of the careful selection of raw materials used for its production: White Tec Plus is mainly composed of natural minerals combined with a small percentage of extremely pure polyester and acrylic polymers.
THOROUGH CLEANING
In case of stubborn stains, scratches or burn marks, the surface can be restored with the use of a Scotch Brite® abrasive sponge and an ordinary abrasive detergent. If the mark is still visible, gently sand the surface with fine sandpaper (P320) and rinse well with water.
Although White Tec Plus is a compact non-porous material with excellent stain resistance, aggressive chemical products such as acetone, trichloroethylene, acids or strong bases, or detergents and cosmetics containing alcohol, should not be used. Do not use metal scrapers, wire brushes, blades, boxcutters or other metal domestic utensils to remove marks, paint, plaster and so on.