Saniflo Sanifloor + 1 For Tiled Floors
Sanifloor + 1 for tiled floors
SANIFLOOR + 1 FOR TILED FLOORS
Sanifloor+ allows a shower to be installed easily and economically without major work accessing sewer pipes. The pump sucks the water from the shower gully and discharges back to the existing sewer line.
Installing a stylish walk-in shower is easy with a Sanifloor®+
- Wireless communication between pump and plug
- Installation without the need for major work
- Large volume output 30l/min
Sanifloor+ includes a suction pump and a plug, and makes it possible to install a walk-in shower without the need for major building work.
The wireless detection system in the plug makes fitting particularly easy. The replaceable detection unit also simplifies maintenance. Designed specifically where floor drainage is required but where space underneath is very limited. This two part kit with a powerful shower waste pump and a choice of four waste designs
information
BRAND
Saniflo
NUMBER OF ENTRIES
1
FREQUENCY
50 Hz
VOLTAGE
220-240 V
CAPABLE
It is capable of pumping a standard electric or gravity mixer shower.
MATERIALS USED FOR THE DRAIN
ABS / Stainless steel
MAX. TEMPERATURE OF THE PUMPED LIQUID (5 MIN)
35 °C
INLET PIPEWORK
16 mm
MOTOR POWER
400W
DISCHARGE PIPEWORK
32 mm
BIMOBJECT CATEGORY
Plumbing - Pumps
OUTLET DIAMETER OF THE DRAIN
16 mm
SHOWER TRAY HEIGHT
0 cm
REFRENCE NUMBER
3308815076232
TOTAL HEIGHT
68 mm
MAXIMUM ABSORBED CURRENT
1.7 A
FLOW RATE PERFORMANCE
VERTICAL/HORIZONTAL PERFORMANCE
Increase size of horizontal run by one pipe size after 5m. All horizontal pipework requires a minimum of 1:100 fall.
MAINTENANCE
To maintain radio signal integrity pump must be installed in same room with power cable end facing towards shower waste gully.
MAX. HEAD (Q0)
3 m
IP RATING
IP44
DIMENSIONS
- Length : 295
- Width : 191
- Height : 164
VERSIONS
- Sanifloor + 1 for tiled floors
- Sanifloor + 2 for flexible floors
- Sanifloor + 3: For extra-flat shower trays
MATERIALS USED FOR THE DRAIN
ABS / Stainless Steel
DISCHARGE LENGTH
30 m
MATERIAL SECONDARY
PP-MD
OUTLET DIAMETER OF THE DRAIN
16 mm
DETAIL VIDEO