Studco HEDA Tough Wall System
HEDA Tough - Wall System
HEDA TOUGH - WALL SYSTEM
Why choose HEDA?
Reduced construction time does not compromise premium performance. Engineered specifically for opening connections, HEDA is suited to openings of a vast range of applications. Whether it is to be installed internally or externally, for a window or a door, for a small or large opening, HEDA will fit the bill.
- Pre-engineered design that’s easy to install.
-Saves time on the jobsite.
- Versatile for both internal and external openings.
- Suited to a wide scope of projects, as its strength allows it to work with large openings and heavy structures.
- Made for you – Available in custom sizing for your project.
- Expert Technical Assistance – Studco engineering team will be on hand to ensure all your specifications, requirements and queries are met.
- Alternative to boxed or spiced studs that involves fewer sections and fewer connections.
OPENING
THE FAST AND EASY WAY OF CREATING OPENINGS IN INTERNAL AND EXTERNAL WALLS
The HEDA® System from Studco offers a fast and easy way of creating openings in walls in both internal and external applications. Traditionally, wall openings have required two or three studs at each side of the jamb and a series of studs and track to act as a lintel. Whilst this method remains highly popular, the new HEDA System from Studco® uses fewer sections and fewer connections, thereby greatly decreasing construction time and simplifying the construction process.
INTERNAL OPENINGS
Replace boxed studs with one HEDA section in doorways and large openings.
EXTREME WALLS
Extreme heights, extreme loads and extreme performance.
EXTERNAL OPENINGS
Use HEDA System for lintels, headers, sills and jambs in external openings for windows and doors.
information
BRAND
Studco
CODE
SJ3-35843
PRODUCTION
Made In USA
CATEGORY
Studco Structural Stud 3” Flange
APPLICATIONS
- Commercial
- Residential
COMPONENTS
The HEDA Tough Wall System is made up of two components: The HEDA Jamb and the HEDA Connector.
CHARACTERISTICS
- Fast construction time
- Fewer sections and connections than traditional methods
SCOPE
The HEDA Tough Wall System is suited to a wide scope of projects.
CERTIFICATION
ISO9001 Quality Management System
TORSION PROPERTIES
- St Venant torsion constant J1000 : 0.345 in.4
- Warping constant Cw : 3.116 in.6
- Distance from shear center to neutral axis Xo : -2.967 in
- Distance from shear center to mid-plane of web m : 1.702 in
- Polar radius of gyration Ro : 3.529 in
- Beta β : 0.293 β
- Max. unbraced length Lu : - in.
GROSS SECTION PROPERTIES
- Cross Section Area A : 0.509 in.2
- Moment of inertia Ixx : 1.159 in.4
- Section modulus Sxx : 0.639 in.3
- Radius of gyration Rxx : 1.509 in.
- Moment of inertia Iyy : 0.700 in.4
- Radius of gyration Ryy : 1.172 in.
USE
- Internal
- External wall systems
OPENINGS
The HEDA Tough Wall System decreases construction time and simplifies the construction process of constructing wall openings.
FULLY ENGINEERED SOLUTION
The HEDA System has been fully engineered to meet BCA requirements and Australian Standards, ensuring you of code compliance whenever you use Studco’s new HEDA System. The HEDA System is suitable for most opening applications and by discussing your needs with a Studco representative, you can be sure that even your most demanding opening specifications can be accommodated.
EFFECTIVE SECTION PROPERTIES
- Moment of inertia for deflection Ixx : - in4
- Section modulus Sxx : - in3
- Allowable bending moment Ma-L : - in.-k
- Allowable moment based on distortional buckling Ma-D : - in-k
- Allowable strong axis shear away from punchouts Vag : - lbs
- Allowable strong axis shear at punchouts VaNet : - lbs
- Effective moment of inertia Iyy : - in.4
- Effective Section modulus Syy : - in.6
- Allowable moment at yield Ma-yy : - in.
- Allowable weak axis shear Vay :- lbs.
GEOMETRIC PROPERTIES
- Web Depth (in) : 3-5/8”
- Flange Width (b) : 3”
- Stiffening Lip : 3/4”
- Weight (lb/ft) : 1.73
- Punchout Width : 1-1/2”
- Punchout Height : 2-1/4”
- Gauge : 18 GA
- Design Thickness : 0.0451
- Thickness - Mils : 43
- Yield Strength FY (KSI) : 43
- Coating : G60
ASTM INFORMATION
AMERICAN SOCIETY FOR TESTING & MATERIALS
All products manufactured by STUDCO BUILDING SYSTEMS are certified to meet or exceed all applicable American Society for Testing & Materials standards as listed below. STUDCO BUILDING SYSTEMS is also accredited to ISO9001- an internationally recognized standard.
MATERIAL SPECIFICATIONS (ASTM)
- All STUDCO Structural framing members conform to A1003 - A1003 is the Standard specification for steel sheet, Carbon, Metallic- and Nonmetallic - Coated for Cold Formed Framing Members Coating Specification (ASTM) .
- All STUDCO Structural framing members conform to C955 - C955 Standard specification for load-bearing (transverse and axial) steel studs, runners (tracks), and bracing or bridging for screw application of gypsum panel products and metal
plaster bases.
PRODUCT SPECIFICATIONS (ASTM)
- ll STUDCO Structural framing members conform to C955 - C955 Standard specification for load-bearing (transverse and axial) steel studs, runners (tracks), and bracing or bridging for screw application of gypsum panel products and metal plaster bases.
- All Structural products have a G-60 minimum weight conforming to ASTM Specification A1003 or have a protective coating with the industry standard requirements of ASTM C645. A G90 Coating is available upon request.
- All Structural Studs Conform to U420 Standards for Fire Rated Assemblies.