Decorative Ceiling Tiles Stainless Steel Diamond Plate - Wall
STAINLESS STEEL DIAMOND PLATE - WALL
STAINLESS STEEL DIAMOND PLATE - WALL
Real Stainless Steel Diamond Plate NuMetal Aluminum Laminate Sheet 4ft. x 8ft. 296 GEK
The NuMetal Stainless Steel collection is made of real stainless steel and retains all the properties of Stainless Steel. It is constructed with an ultra- thin layer of stainless steel with standard HPL backing and allows standard woodworking tools to be used in fabrication. ATI offers several styles to choose from that are in-stock.
INFORMATION
MODEL NO
296 GEK
MATERIAL
Stainless Steel
COVERAGE
32 sqft
FORMAT
Tiles
APPLICATIONS
- Commercial
- Healthcare
- Institutional
- Hospitality and Retail
ADHESIVES
Any contact cement or cold set adhesive normally used with decorative laminates is suitable. Avoid adhesive spreading or set up on metallic surface. Use only naphtha orbenzine in adhesive cleanup - - do not use lacquer solvents or other adhesive solvents, which attack lacquer coatings.
INSTALLATION METHOD
Glue Up
SIZE
48" x 96"
TYPE
Diamond Plates
WEIGHT
9lb
THICKNESS
0.050"
USE
- Ceiling
- Wall Laminates
ADHESIVES
Any contact cement or cold set adhesive normally used with decorative laminates is suitable. Avoid adhesive spreading or set up on metallic surface. Use only naphtha orbenzine in adhesive cleanup - - do not use lacquer solvents or other adhesive solvents, which attack lacquer coatings.
INSTALLATION METHOD
Glue Up
SURFACE
Anodization produces a hard surface therefore no need to wax will not tarnish has the high abrasion resistance of aluminum. All products are covered with a clear peel off mask to protect the finish. This mask should be left on during fabrication to avoid marring the surface. NuMetal is recommended for all vertical and light duty horizontal use. All brushed NuMetal, Décor 99, Copper, and Art Copper laminates are coated with cellulose based lacquer. This lacquer is compatible with other lacquer systems, which allows for additional finishing if necessary.
STORAGE
Metal laminates should be stored face up in a cool, dry area and in a completely supported flat position. Use a top sheet of chipboard or similar material to hold stored sheets flat. Edge storage is not recommended.
CHARACTERISTICS
-High-pressure laminates
-Real metal surface
-Hand-painted
-Does not tarnish
-High abrasion resistance
FABRICATING
NuMetal is fabricated with the same tools used on any high pressure decorative laminate, and bonded to the same type of substrates commonly used in the trade. Special care must be taken to avoid denting the surface with tools or scratching the surface with particles of metal. Carbide-tipped blades and bits are recommended. Dull blades will generate heat and scorch metal.
MAINTENANCE
Make sure that the cleaning agent used is compatible with either our anodized or lacquered products prior to use. Clean surfaces with a soft cloth using household cleaner - waxes, Windex-type solutions, or ordinary soap and water. Good furniture or automobile waxes provide additional protection for all metal laminate surfaces.