Steni Colour
STENI COLOUR
STENI COLOUR
Steni Colour façade panels are stone composite panels with a smooth surface of electron beam-cured acrylic.
INFORMATION
WARRANTY
60 years warranty
STOCKED FORMAT
1195 x 2995 mm
CUSTOM PRODUCTION
- (292 – 1195 mm) x (850 – 3495)
- Full production width of 1195 mm is always charged
STANDARD PRODUCTION
295 x (1195 mm – 3495 mm) 395/595/795/895/1,195 x (850 mm – 3495 mm)
VIRTUALLY ENDLESS RANGE OF COLORS
With 6 mm Steni Colour you can choose from 60 standard colours and three gloss levels. If you choose this façade panel, you can really go wild with colours and give your building a personal touch. Steni façade panels come with light edges as standard, and can be delivered with dark edges at an additional cost.
REUSE – A SUSTAINABLE ALTERNATIVE
Steni Colour façade panels have a 60-year functional warranty and over 100 years of life expectancy, so we believe they are well suited for sustainable reuse. As a response to several global environmental challenges, we have therefore developed and launched the Steni Colour Reuse.
MINIMAL NEED FOR MAINTENANCE
Steni Colour requires minimal maintenance and can be cleaned with most products used for house cleaning. With the right cleaners, you can even remove graffiti without breaking the discs. The panels can also withstand the use of high-pressure washers.
EASY INSTALLATION ALL YEAR ROUND
Steni's façade panels are installed as aerated cladding, and the work can be carried out all year round – regardless of temperature and weather conditions. Steni's façade panels are diffusion tight, which means that they can withstand being submerged in water.
PROPERTIES
IMPACT-RESISTANT
Steni’s façade panels are robust and impact-resistant and made of stone composite.
EASY INSTALLATION
Façade panels from Steni are easy to install. The panels are installed as ventilated cladding and can be installed all year round, regardless of temperature and weather conditions.
FROST-RESISTANT AND WATER-IMPERMEABLE
Steni facade panels are moisture- and frost-resistant. They can withstand extreme outdoor temperatures and can be worked and bent in temperatures as low as -30°C. The façade panels are 100% water-impermeable – which means that they can remain immersed in water without swelling. It also means that you do not have to seal the edges after cutting.
PRE-CUT FORMAT
Steni’s continuous production process allows you to choose from a wide range of standard formats, with a width of up to 1,195 mm and a length of up to 3,495 mm. This means that there is very little wastage. Steni develops customised solutions together with our customers, and we offer moulded L- and U-shaped elements in a variety of angles for all our products and finishes. Curved and corner elements offer a wealth of exciting opportunities and produce seamless transitions that give aesthetic beauty to a building.
LOW-COST DURABILITY
When you buy façade panels from Steni, we offer you a range of services to help you with logistics and installation. You can order customised sizes, façade panels can be pre-drilled and we also offer MM packaging – all to make work on the construction site easier. You save valuable time and money – and get a competitively priced façade that requires minimal lifetime maintenance.
LOW CARBON FOOTPRINT
Façade panels from Steni have a low carbon footprint. They produce 14–17 kg of CO2/m². All Steni façade panels have a life-cycle analysis and an Environmental Product Declaration (EPD). Steni façade panels can be delivered to regular public waste treatment facilities at the end of their useful life. Steni waste is “inert”: it has no impact on the external environment.
EASY CLEANING
We recommend an annual visual inspection to check whether pollution, temperature fluctuations, weather conditions or any of the building’s material properties have affected the stability or appearance of the façade. Review the following checklist and take any remedial actions required : • Check that the façade has been washed properly • Check for external marks/damage from vandalism, collisions, etc. • Check the attachment points. You can normally use a pressure washer with a pressure of up to 100 bar on STENI panels. We recommend holding the nozzle at a distance of 20–30 cm from the panels. High-pressure washing with hot water (70–80°C) is normally very effective and is environmentally preferable to the use of chemicals.