Decorative Ceiling Tiles Diamond Mill Gun Metal NuMetal Aluminum Laminates Sheet
DIAMOND MILL GUN METAL NUMETAL ALUMINUM LAMINATES SHEET
DIAMOND MILL GUN METAL NUMETAL ALUMINUM LAMINATES SHEET
Decorative Laminates’ NuMetal™ product line offers the Divine Metals Collection: 14 designs that combine qualities from water and rare earth elements to celebrate the unique relationship between nature’s raw power and human curiosity to bring inspiration to each day.
The HPL finishes range from Rose Gold and Gun Metal to the iridescent Polished Smoke and classic Brushed Aluminum. The patterns draw inspiration from the natural world, including: Diamond, Waterfall, Aqua, Neptune, and Titan. Available in 4’ x 8’ sheets, 4’ x 10’ available on special order.
NuMetal™ is a collection of HPLs (High Pressure Laminates) with a real metal surface and phenolic paper backing. NuMetal sheets are usually 4’ x 8’ (4’ x 10’ available on special order) in Aluminum, Copper, Real Stainless Steel, or Unique Art; featuring embossing, hand painting, etching, and other innovative techniques to enhance the look of metals.
High quality design solutions are its trademark. NuMetal is suitable for vertical and light-duty horizontal applications. As experts in surfaces that remain abrasion resistant, in addition to performance, NuMetal products meet safety and material standards.
INFORMATION
STORAGE
Metal laminates should be stored face up in a cool, dry area and in a completely supported flat position. Use a top sheet of chipboard or similar material to hold stored sheets flat. Edge storage is not recommended.
MODEL
248 DIA MGMNA
INSTALLATION METHOD
Glue Up
CONDITION
New
WEIGHT
8lb
BALANCING
Counter balancing is necessary as with other high pressure laminates to prevent warping of the substrate.
ADHESIVE
Any contact cement or cold set adhesive normally used with decorative laminates is suitable. Avoid adhesive spreading or set up on metallic surface. USE ONLY NAPHTHA OR BENZINE IN ADHESIVE CLEANUP - - do not use lacquer solvents or other adhesive solvents, which attack lacquer coatings.
COVERAGE
32 sqft
SIZE
48" x 96"
FABRICATING
NuMetal is fabricated with the same tools used on any high pressure decorative laminate, and bonded to the same type of substrates commonly used in the trade. Special care must be taken to avoid denting the surface with tools or scratching the surface with particles of metal. Carbide-tipped blades and bits are recommended. Dull blades will generate heat and scorch metal.
MAINTENANCE
Make sure that the cleaning agent used is compatible with either our anodized or lacquered products prior to use. Clean surfaces with a soft cloth using household cleaner - waxes, Windex-type solutions, or ordinary soap and water. Good furniture or automobile waxes provide additional protection for all metal laminate surfaces.
MATERIAL
Aluminum
MATERIAL THICKNESS
0.035"
SURFACE
Anodization produces a hard surface - - therefore no need to wax - - will not tarnish - - has the high abrasion resistance of aluminum. All products are covered with a clear peel off mask to protect the finish. This mask should be left on during fabrication to avoid marring the surface. NuMetal is recommended for all vertical and light duty horizontal use. All brushed NuMetal, Décor 99, Copper, and Art Copper laminates are coated with cellulose based lacquer. This lacquer is compatible with other lacquer systems, which allows for additional finishing if necessary.
WARRANTY
All shipments are to be inspected within ten working days after delivery and we are to be informed in writing of any potential adjustment necessary. The seller's only obligation will be to replace defective sheets, on a one-to-one basis, upon the user presenting proof that it is a manufacturing defect and not a result of fabrication. Neither the manufacturer nor the seller shall be liable for any additional loss or damage either directly or indirectly arising as a result of using these products.