Keim Polychro-Intérieur Paints
POLYCHRO-INTÉRIEUR PAINTS
POLYCHRO-INTÉRIEUR PAINTS
Polychro-intérieur provides walls and ceilings with a sensational colour depth and elegance.
INFORMATION
COLOR SHADE
- Keim Polychro-intérieur : Colour shades are available.
- PolyChro-fond : Milky
DENSITY
- Polychro -intérieur : Approx. 1.4 - 1.5 g/cm³
- Polychro-fond : ca. 1,0 - 1.1 g/cm³
APPLICATIONS
- Keim Polychro-intérieur : Block Brush, Roller, Airless Sprayer
- PolyChro-fond : Block Brush, Low-pressure Sprayer, Roller
CONSUMPTION
- Keim Polychro-intérieur : Approx. 0.12 l/m²
- PolyChro-fond : Approx. 0.1 - 0.2 l/m²
GENERAL INFORMATION
Cover surfaces not to be treated, especially glass, ceramics and natural stone. Any splashes on surrounding surfaces or traffic areas must be rinsed off immediately with plenty of water. Mixing with products not part of the system or other foreign additives is not permitted.
THE ORIGINAL LE CORBUSIER COLOURS BY KEIM
poLyChro®-intérieur is the original Le Corbusier paint – a particularly high-class, rich in colour, velvet-matt interior paint with a mineral base. Exclusively manufactured in absolutely unique colour shades according to master Le Corbusier‘s colour keyboards and quality-monitored to the principles of Les Couleurs suisse AG representing the Fondation Le Corbusier in Paris.
PROPERTIES POLYCHRO -INTÉRIEUR
- Excellent covering power
- Low environmental impact
- Ultra matt surface
- Natural, mineral binder
- Anti-fungal and anti-algae thanks to natural alkalinity
ADVANTAGES
- Unequalled colour depth and intensity
- Purest colour pigments
- Velvet-matt surface
- Natural, mineral binder
- Highly permeable for a healthy indoor climate
- Ecologically sound
- Excellent hiding power
- Naturally anti-mould
PROPERTIES-POLYCHRO-FOND
- Absorption-regulating
– Equalising
– Solidifying
– Adhesion-promoting
– Permeable
– Microporous
– No solvents added
– Low-odour
CLASSIFICATION - POLYCHRO -INTÉRIEUR
- Classification according to: DIN EN 13300
- Classification according to VOB: Silicate emulsion paint according to DIN 18363 sec. 2.4.1
- Water vapour diffusion current density (V-value): > 2000 g/(m² · d)
- Diffusion-equivalent air layer thickness (sd-value): < 0,01 m
- Wet abrasion resistance: Class 2
- Test standard Wet Abrasion Resistance: EN ISO 11998
- Gloss level at 85º: Dull Matt
- Maximum particle size: Fine
PRODUCTS
KEIM POLYCHRO-INTÉRIEUR
PoLyChro-intérieur can be applied to all common interior wall and ceiling surfaces. Unsuitable are lacquers and old coats of distemper.
PACKING - KEIM POLYCHRO-INTÉRIEUR
| TYPE OF CONTAINER | CONTAINER CONTENT | UNIT OF MEASURE |
|---|---|---|
| Bucket | 2.5 | l |
| Bucket | 5 | l |
| Bucket | 10 | l |
POLYCHRO-FOND
Polychro®-fond is a permeable, mineral primer for interior use to equalize differences in absorbency in the substrate and to strengthen highly absorbent, chalking or sandy substrates.
PACKING - POLYCHRO-FOND
| TYPE OF CONTAINER | CONTAINER CONTENT | UNIT OF MEASURE | QUANTITY ON PALLET |
|---|---|---|---|
| Jerry Can | 5 | l | 96 |
APPLICATION INSTRUCTIONS
SUBSTRATE PREPARATION
In case of strong grazing light, priming with poLyChro-fond is recommended.
APPLICATION CONDITIONS
Ambient and substrate temperature during application and drying must be ≥ 5 °C.
PREPARATION OF MATERIAL
Stir up polyChro-intérieur thoroughly before application.
APPLICATION
- Grundanstrich: Apply polyChro-intérieur undiluted or diluted with max. 10 % of Water.
- Schlussanstrich: Apply polyChro-intérieur undiluted.
DRYING TIME
Can be overcoated after 12 hours at the earliest (at 23°C and 50% RH). At higher relative humidity, layer thicknesses or lower temperatures, drying is delayed accordingly.
CONSUMPTION
These material consumption values are guide values for smooth substrates. Exact consumption values must be determined by means of test areas.