Bimobject Sanifloor+ 3 Pumping Solution
SANIFLOOR + 3 PUMPING SOLUTION
SANIFLOOR+ 3 PUMPING SOLUTION
Sanifloor + allows a shower to be installed easily and economically without major work accessing sewer pipes. The pump sucks the water from the shower gully and discharges back to the existing sewer line. Installing a stylish walk-in shower is easy with a Sanifloor®+
-Wireless communication between pump and plug -Installation without the need for major work -Large volume output 30l/min
Sanifloor + includes a suction pump and a plug, and makes it possible to install a walk-in shower without the need for major building work.
The wireless detection system in the plug makes fitting particularly easy. The replaceable detection unit also simplifies maintenance.
The Sanifloor + has 3 versions for all the floor coverings on the market.
- Sanifloor + 1 for tiled floors
- Sanifloor + 2 for flexible floors
- Sanifloor + 3 : For extra-flat shower trays
The Sanifloor + 3 is an ideal pumping solution for use with a shower tray within a wetroom or bathroom environment. It is capable of pumping a standard electric or gravity mixer shower. This two part kit contains a shower pump and 4 differing wastes depending on application needed.
The Sanifloor + is now wireless making it even easier to install. The pump can be sited up to 3 meters from the gully and up to 300mm above the gully, it discharges through 32 mm pipework.
Its clever dual function means it can suck water from the gully and pump the water away up to 3 metres vertically or 30 metres horizontally. It is quieter and more efficient than other products on the market.
information
CAPABLE
It is capable of pumping a standard electric or gravity mixer shower.
NUMBER OF ENTRIES
1
DISCHARGE PIPEWORK
32 mm
INLET PIPEWORK
16 mm
MOTOR POWER
400W
DIMENSIONS
- Length : 295
- Width : 191
- Height : 164
BIMOBJECT CATEGORY
Plumbing - Pumps
VOLTAGE
220-240 V
IP RATING
IP44
FREQUENCY
50 Hz
MAXIMUM ABSORBED CURRENT
1.7 A
MATERIAL SECONDARY
PP-MD
MAX. HEAD (Q0)
3 m
FLOW RATE PERFORMANCE CHART
DISCHARGE LENGTH
30 m
TOTAL HEIGHT
57 mm
MATERIALS USED FOR THE DRAIN
- ABS
- Stainless steel
ELECTRICAL CLASS
I
OUTLET DIAMETER OF THE DRAIN
16 mm
MAX. TEMPERATURE OF THE PUMPED LIQUID (5 MIN)
35 °C
SHOWER TRAY HEIGHT
0 cm
VERTICAL/HORIZONTAL PERFORMANCE
Increase size of horizontal run by one pipe size after 5m. All horizontal pipework requires a minimum of 1:100 fall.
MATERIAL MAIN
- PE
- PP
UNIQUE REF
SanifloorPlus3
TYPE
Object (single object)
COLLECTION SET
SFA
DATE OF PUBLISHING
2020-11-26
MAINTENANCE
To maintain radio signal integrity pump must be installed in same room with power cable end facing towards shower waste gully.