The Splash Lab The Channel Hand Dryer
The Channel Hand Dryer
THE CHANNEL HAND DRYER
-IR Sensor Operated
-Wall-mounted Design
-Marine-grade Stainless Steel Housing
-Easy Maintenance
information
WEIGHT
17 Ib
BODY
316 AISI Stainless Steel
INSULATION
Class I
STAINLESS STEEL GRADE
AISI 304 Stainless Steel
MOTOR POWER
500-350W
VOLTAGE
110 -120 ac; 50/60Hz
CURRENT DRAW
7.6-8.4A
USE
Faucets
DESIGN
Wall-mounted
COLORS
APPLICATIONS
Bathrooms
POWER CONSUMPTION
0.84-1.0 kW
STANDBY POWER
0.3- 0.4W
DRYING TIME
<15 Seconds
MATERIAL
AISI 316 Stainless Steel
NOISE LEVELS
68.6dB
HEATING ELEMENT
500 W
MOTOR TYPE
Brush Type; Dual Ball Bearings
AIR SPEED
364 ft/s
TECHNICAL DRAWINGS
CHARACTERISTICS
-Wide range of matching products -Gold detailing -Choice of handles -Variety of spout heights
MOTOR THERMAL PROTECTION HEATER
Auto resetting thermostat set at 2O3° F
THERMAL PROTECTION
-Auto resetting thermostat set at 185° F -Thermal cutout fuse set to 288° F
AIR FLOW
27.6 cu ft/min
SENSOR RANGE
5" +/- 1"
SECURITY CUT-OFF TIME
60 Seconds
WARRANTY
1 Year Parts And Labor
FORCE LOAD CAPACITY
88 - 110 lbs
APPROVALS
CE, UL, cUL, RoHS, ADA
INSULATION
Class 1
IP RATING
IP35
MAINTENANCE
Easy
INSTALLATION REQUIREMENTS
| PARAMETER | REQUIREMENTS |
|---|---|
| Wall-cut-out (dia) | Ø 1 3/16" |
| Maximum wall thickness | 1 3/8" |
| Anti-rotation collar | Included |
| Reflective surfaces | Not to be installed above highly polished basins |
| Access requirements | Motor to be accessible at all times for servicing |
| Cabling | 15A fused branch circuit is required |
| Power supply | It is recommended that the sensors are installed on their own circuit to avoid interference from other power demands. (i.e lighting) |
INSTALLATION REQUIREMENTS
-Location : Channel hand dryers are supplied with 48" of flexib le hose, so the dryer motor unit must be fitted within 48" of the head unit, to ensure that the motor air-outlet head can be connected. -Basins : The Splash Lab Monolith (Series C or D) basin is recommended for use with the Channel range of products. If an alternative basin is used, please confirm with The Splash Lab that there will be no reflection or splash issue. -Power Supply : A 15A fused supply must be provided for connection to the mains power supply.A 15A fused supply must be provided for connection to the mains power supply.
