Pfleiderer DecoBoard Pyroex
DECOBOARD PYROEX
DECOBOARD PYROEX
Flame resistant particleboard with decorative melamine resin facing on both faces, awarded with the Blue Angel.
INFORMATION
USE
- Furniture
- Interior Fittings
PRODUCT STANDARD
EN 14322
PRODUCT TYPE
Insulation Accessories
AREAS OF APPLICATION
- Furniture and interior fitting
- Fire protection
CERTIFICATION
- Blue Angel
- Cradle To Cradle
- Available
- Fsc Quality Available
- Pefc Quality Available
- Ce conformity
ANTIMICROBIAL EFFECT
Surface with antimicrobial effect in 24 h for interior fit-out and finishes – Test Methodology JIS Z 2801 /ISO 22196
AREAS OF APPLICATION
Preventive fire protection in the decorative sector. For interior fitting as wall and ceiling coverings, installations, room dividers and furniture, in industrial and administrative buildings, schools, sports and festival halls, hotels and care facilities.
BRAND
Pfleiderer
COLLECTION
Pyroex
CORE MATERIAL
- PremiumBoard Pyroex
- Flame resistant particleboard, suitable for non load-bearing purposes in dry areas, for interior fitting and for furniture subject to higher demands on fire protection
PRODUCT FEATURES
- Easy care
- Food harmless
- Antimicrobial
- Flame retardant
- Particularly low emission
- Variety of decors or textures
CHARACTERISTICS
- Wood-based Panel
- Melamine Faced
- Easy To Work
- Ecological
- Low-emissions
- Low Swelling
- Flame Resistance
PRODUCTION
Made in Italy
DISPOSAL
We recommend material or energy recovery in approved plants.
PRODUCT SECTION
APPLICATIONS
- Residential Furniture
- Kitchens
- Built-in-furniture
- Hospitality
- Commercial Shop And Trade
- Corporate
- Health Facilities And Clinics
SPECIAL
A protective foil must be removed as soon as possible after processing – but at the latest within 6 months after delivery – to ensure residue-free removal of the foil. In addition, foiled boards must not be exposed to direct sunlight (UV radiation).
AREAS OF APPLICATION
Preventive fire protection in the decorative sector. For interior fitting as wall and ceiling coverings,installations, room dividers and furniture, in industrial and administrative buildings, schools, sports and festival halls, hotels and care facilities.
RESISTANCE TO HEAT
Heat sources (e.g. coffee machines, printers, fax machines, etc.) should not come into direct contact with the board, otherwise cracks may form due to drying out. For continuous exposure to heat,temperatures of up to 50°C are permissible. In the case of permanent exposure to heat, we expressly draw attention to the risk of cracking.
FORMATE
| LENGTH (MM) | WIDTH (MM) | THICKNESS (MM) |
|---|---|---|
| 2,655 | 2,100 | 10 | 13 | 16 | 18 | 19 | 22 | 25 | 28 | 38 |
| 2,800 | 2,100 | 16 | 19 |
| 5,310 | 2,100 | 10 | 13 | 16 | 18 | 19 | 22 | 25 | 28 | 38 |
| 5,600 | 2,100 | 16 | 19 |
COLOUR AND SURFACE MATCH
-Decor, structure and core board all influence the final appearance of the end product. -Due to the product-specific differences in production technologies, even identical decor/structure/core board combinations can result in slight optical and tactile deviations across different product groups and formats. Such deviations do not constitute a defect. -The choice of surface structure in particular has a significant influence on the visual impression, the tactile perception as well as the technical characteristics of the product. Thus, the overall impression of a decor can change almost completely depending on the surface structure. Furthermore, mechanical influences on the product surface can lead to a higher contrast optical perception with dark decors. -To ensure that you always achieve the best results with our products and to clarify any deviations in advance, we will be happy to advise you individually.
PRODUCT HANDLING
INSTALLATION AND ASSEMBLY
-Please ensure that the material is processed and fitted correctly and using the best available technology. -Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be at the normal climatic conditions in which the material will later be used.
MACHINES AND TOOLS
-The fire-retardant additives and colourants contained in the support can create deposits on tools and therefore reduce their durability. -The adhesion of glues can be reduced in exceptional cases. -Can be worked with carbide (HW) or diamond (DP) tipped tools on conventional woodworking machines.
FITTING TECHNOLOGY
All conventional removable and non-removable fittings for solid wood and wood materials are suitable.
CLEANING AND CARE
-The surface can be cleaned with water and gentle cleaning agents. -The use of cleaning products, cloths, sponges with abrasive ingredients, should be avoided. -For removal of particularly stubborn stains, industrial cleaners suitable for plastic surfaces can be used. Before use we would recommend testing in a small, hidden area.
EDGING
-Thick and thin edges are suitable. -EVA and PUR hotmelts are recommended for edge adhesion.
STORAGE, HANDLING AND TRANSPORT
-On level, full area surfaces (e.g. pallets), protected against moisture, in dry, ventilated rooms. Outdoor storage is not suitable. -Please note that incorrect storage, regardless of its duration, may cause irreversible distortion to the sheets. -Foreign bodies or impurities in the pallet of sheets can lead to impressions and damage to the surface of the board. -Ensure that sufficiently large and sturdy bases, e.g. pallets, are used for the transportation of stacked sheets. The sheets on the pallet must be secured against slipping. -Sheets / boards must not be moved against each other; they should be moved individually by hand or with suction equipment. -A protective foil must be removed as soon as possible after processing – but at the latest within 6 months after delivery – to ensure residue-free removal of the foil. In addition, foiled boards must not be exposed to direct sunlight (UV radiation).