Schoeck Rainscreen Cladding Façades
RAINSCREEN CLADDING FAÇADES
RAINSCREEN CLADDING FAÇADES
Breakthrough in façade connections.Schöck Isolink® type F-S for rainscreen cladding façades.
Schöck Isolink® for rainscreen cladding facades are thermal bridge free fasteners for insulated and non-insulated substrate walls made of concrete or brick. These comprise a Combar® glass-fibre bar and a stainless-steel threaded end.
INFORMATION
CERTIFIED PASSIVE HOUSE COMPONENT
Schöck Isolink® F-S has been awarded the highest classification of phA+ for all weight classes by the Passive House Institute.
CHARACTERISTICS
-Glass-fiber Composite Design -Low Thermal Conductivity -Energy-efficient
DOWNLOAD
↓ Energy-efficient façade solutions from a single source
↓ Brochure Schöck Isolink® for rainscreen cladding facades
↓ Environmental Product Declaration EPD Schöck Isolink®
↓ Certificate Passive House Institute: Certified Passive House Component Schöck Isolink® type F
APPLICATIONS
Construction
USE
Rainscreen Cladding Facades
SUPERB COST EFFICIENCY
The low thermal conductivity of the Schöck Isolink® means the thickness of the thermal insulation can be reduced significantly without affecting the U-value of the wall. In direct comparison to aluminium wall brackets, this results in savings of approximately 50% on insulating materials.
TECHNICAL APPROVAL
Schöck Isolink® F-S has been tested and approved by the German Institute for Structural Engineering (DIBt).
FASTENING WITHOUT THERMAL BRIDGES
The thermal insulation performance of Schöck Isolink® F-S is around 200 times better than that of aluminium wall brackets and around 15 times better than that of stainless-steel wall brackets.
EASY TO INSTALL
The cylindrical bar can be easily anchored within a concrete or brick wall using approved composite mortar. The metric connection thread allows an anchor plate or substructure to be installed without frameworks or diagonals.
FIRE PROTECTION PROPERTIES
Schöck Isolink® for rainscreen cladding façades complies with the fire protection requirements for building classes 1–5 in accordance with state building regulations.
BENEFITS
- Versatile applications : For all standard raincreen cladding façade substructures
- No thermal bridges : 50% savings can be made on the thickness of thermal insulation
- Optimum insulation performance : Thanks to the exceptional structural properties of Combar® glass fibre composite
- Easy to install : The cylindrical bar with connection thread is easy to connect to a wall or substructure without frameworks or diagonals.
INSTALLATION SCHÖCK ISOLINK® TYPE F-S (FORMER TA-S). FOR RAINSCREEN CLADDING FAÇADES.
Schöck Isolink® for rainscreen cladding façades are thermal bridge free fasteners for insulated and non-insulated substrate walls made of concrete or brick. These comprise a Combar® glass-fibre bar and a stainless-steel threaded end. The short video shows the installation steps at the construction site.