kryton Hydrostop™ Sealer *
HYDROSTOP™ SEALER *
HYDROSTOP™ SEALER *
Hydrostop Sealer is a high-performance penetrating sealer used by itself to protect concrete, brick, mortar and masonry from the damaging effects of water intrusion.Hydrostop Sealer is a clear, water-based liquid that is sprayed or rolled onto horizontal or vertical surfaces. It does not affect appearance or breathability, and will not wear, fade, yellow, crack or peel.
information
PRODUCTION
Made In Canada
CHARACTERISTICS
Water-based liquid
DENSITY G/CM3 (LB. /CU. IN.)
1 (0.036)
USE
- Water-repellent barrier
- Construction materials
VOC
< 20 g/L (including water, California and OTC States), EU (w/w) < 2%
PACKAGING
Hydropel Sealer is available in 18.9 L (5 US gal.) pails and 208 L (55 US gal.) drums.
APPEARANCE
Milky white liquid, dries clear
DOWNLOADS
↓ Techical Data Sheet
LIMITATIONS
-Not effective on non-silica substrates such as wood, vinyl, asphalt, metals and painted or sealed surfaces -Maximum water resistance will be attained once the chemical reaction is complete, typically 4-7 days
-Limited repellency to oil -Not recommended for constant immersion
-Overcoating with water-based paints or sealers is not recommended
SAFETY
Read the Safety Data Sheet (SDS) for this product. For professional use only. This product may irritate eyes, skin and the respiratory tract. Avoid contact with skin or eyes. Avoid breathing mist. Wear long sleeves, safety goggles and impervious gloves.
APPLICATIONS
-Bridge Decks -Roads -Parking Structures -Vertical/horizontal Concrete -Sidewalks -Marine Floats -Patios
SHELF LIFE
When stored between 4°C – 38°C (39°F – 100°F), Hydropel has a shelf life of at least 2 years in unopened containers. Do not allow the product to freeze.
PH
7-8
COLLECTION
Hydrostop™
APPLICATIONS
-Bridge decks and supports -Parking structures -Concrete, block or brick walls and chimneys -Driveways, including exposed aggregate -Sidewalks, patios, balconies, steps -Concrete pavers and retaining walls -Marine floats and docks -Stucco walls -Concrete roof tiles and unglazed floor tiles - Asbestos cement -Use to treat any masonry surface made from concrete, brick, mortar, grout, tile, terra-cotta, plaster, stone, and limestone
DETAILS
Before using this product, refer to Application Instruction 7.11 — Sealing Above Grade Concrete & Masonry. Mix thoroughly prior to use. Always apply a small test patch before starting the main work. Apply Hydrostop with a low pressure sprayer while the surface temperature is above 4 °C (40 °F) and remains above 4 °C (40 °F) for a minimum of 24 hours. Coverage will vary depending on the density and porosity of the surface. Use the following application rates as a guide. Use a test patch to determine the appropriate coverage.
- 7.4 m2/L (300 sq. ft./gal.) dense concrete
- 5.9 m2/L (240 sq. ft./gal.) normal concrete
- N5.0 m2/L (200 sq. ft./gal.) concrete block
- 3.7 m2/L (150 sq. ft./gal.) split faced concrete
- 2.5 m2/L (100 sq. ft./gal.) red brick
FEATURES
- Is cost-effective and outlasts other sealers
- Provides excellent water repellency and keeps water out of your structure
- Does not change the appearance of the surface
- Works as a chloride screen to protect against damage from de-icing salts, sea water, etc.
- Helps to protect reinforcing steel from corrosion
- Resists acid rain and other chemicals
- Helps to prevent freeze or thaw damage
- Resists mildew and moss formation, rust stains and efflorescence
- Requires no special tools to apply
- Can be used for outdoor or indoor and enclosed applications with minimal odour
RECOMMENDED
-Bridge decks and supports
-Parking structures
- Concrete, block or brick walls and chimneys
- Driveways, including exposed aggregate
- Sidewalks, patios, balconies, steps
- Concrete pavers and retaining walls
- Marine floats and docks
- Concrete roof tiles and unglazed floor tiles
- Any masonry surface made from concrete, brick, mortar, grout, tile, terra-cotta, plaster, stone, and limestone
PERFORMANCE PROPERTIES
| Water Absorption (Fed Spec SS-W-110-C) | 0.3% |
|---|---|
| Water Absorption Reduction (NCHRP 244, Series II) | 72% |
| Water Penetration Reduction Under ‘Wind Driven Rain’ (ASTM E514) | 89% |
| Chloride Intrusion Reduction (NCHRP 244, Series II) | 76% |
| Accelerated Weathering Reduction in Soluble Chloride (NCHRP 244, Series IV) | 90% |