Pfleiderer Duropal Element Microplus® P2 Particleboard
DUROPAL ELEMENT MICROPLUS® P2 PARTICLEBOARD
DUROPAL ELEMENT MICROPLUS® P2 PARTICLEBOARD
Flat bonded element consisting of a particleboard type P2 to EN 312, surfaced on both sides with Duropal HPL microPLUS® with an antimicrobial and antiviral surface finish (Sanitized Silver).
FEATURES
PRODUCT STANDARD
EN 13894-1
FORMALDEHYDE EMISSION CLASS
E1 E05
EC SCOPE
- EN 438-7:2005
- HPL composite panel intended for internal wall and ceiling finishes (including suspended ceilings)
REACTION TO FIRE
- Normally flammable
- D-s2,d0 (EN 13501-1, CWFT acc. to 2003/593/EG)
CORE MATERIAL
ClassicBoard P2 CARB2: Low emission particleboard core, type P2 in accordance with EN 312, suitable for non load-bearing purposes in dry areas.
ANTIMICROBIAL EFFECT
Surface with antimicrobial effect in 7 h for interior fit-out and finishes – Test Methodology JIS Z 2801 / ISO 22196
ANTIVIRAL EFFECT
Surface with antiviral effect against enveloped viruses in 24 h for interior fit-out and finishes - Test Methodology ISO 21702:2019
SAFETY
-This product follows the REACH regulation EC 1907/2006 an article. Following Article 7 it does not need to be registered. -The surface is physiologically safe, and approved for direct contact with food acc. to Regulation (EU) No. 10/2011. -We manufacture the panels without the use of halogens, heavy metals, preservatives, wood protectors or organic solvents.
SPECIAL
-Sanitized Silver is based on the natural effect of silver, embedded in a patented glass-ceramic. This additive is free of nanoparticles and is incorporated as a dispersion into the resin of our decor / overlay papers. -Sanitized Silver remains in the product and does not wash out. The effect is ensured over the whole life cycle of the product. -It is recommended to order overlay for horizontal, heavy used surfaces in combination with metallic designs. Slight visual difference to the surface is possible without the overlay. -FSC certification or PEFC certification available on request.
COLOUR AND SURFACE MATCH
-Decor, structure and core board all influence the final appearance of the end product. -Due to the product-specific differences in production technologies, even identical decor/structure/core board combinations can result in slight optical and tactile deviations across different product groups and formats. Such deviations do not constitute a defect. -The choice of surface structure in particular has a significant influence on the visual impression, the tactile perception as well as the technical characteristics of the product. Thus, the overall impression of a decor can change almost completely depending on the surface structure. Furthermore, mechanical influences on the product surface can lead to a higher contrast optical perception with dark decors. -To ensure that you always achieve the best results with our products and to clarify any deviations in advance, we will be happy to advise you individually.
INFORMATION
USE
- Furniture
- Interior fittings
- Partitions
FORMAT
- Slabs
- Plates
- Panels
CHARACTERISTICS
-Antimicrobial and antiviral properties -Wear resistant -Durable -Easy to care -Moisture resistant -High impact resistance -Low emission -Safe for food
BRAND
Pfleiderer
PRODUCT TYPE
Insulation Accessories
PROPERTIES
- Decorative variety
- Easy care
- Antimicrobial
- Food harmless
APPLICATIONS
- Clinics
- Hotels
- Cruise ships
- Educational institutions
- Sports and wellness facilities
DIMENSIONS
- Length : 4.100 mm
- Width : 1.300 mm
- Thickness : 9.6, 16, 17.6, 19, 20.6, 25, 29.6, 39.6 mm
AREAS OF APPLICATION
Furniture production and interior design wherever high demands are made on quality and durability: For kitchen and interior design furniture, in shop fitting and partition wall construction, for interior fitting of banks, offices, schools, clinics, laboratories, retail buildings, in shipbuilding and motor vehicle construction.
CERTIFICATION
- JIS Z 2801 / ISO 22196
- Blue Angel
- FSC quality available
- PEFC quality available
- CE conformity
PRODUCT SECTION
HANDLING
EDGING
- Thick and thin edges are suitable.
- EVA and PUR hotmelts are recommended for edge adhesion.
DISPOSAL
We recommend material or energy recovery in approved plants.
PROCESSING
Can be worked with carbide tipped tools on conventional woodworking machines.
HEALTH AND SAFETY
Please wear the appropriate personal protective equipment (PPE) when processing and handling.
FITTING TECHNOLOGY
All conventional removable and non-removable fittings for solid wood and wood materials are suitable.
CLEANING AND CARE
-The surface can be cleaned with water and non-aggressive cleaning products. For more detailed information, please refer to our "Duropal HPL & DecoBoard cleaning recommendation". -For further information, please follow the recommendation in the "Cleaning HPL" leaflet on the site www.icdli.com.
INSTALLATION AND ASSEMBLY
-Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be at the normal climatic conditions in which the material will later be used. -Please ensure that the material is processed and fitted correctly and using the best available technology. -Especially for large applications, we recommend paying attention to the colour and texture unifomity of the boards and cut products used when further processing and installing and that the production direction is taken into account.
STORAGE, HANDLING AND TRANSPORT
-On level, full area surfaces (e.g. pallets), protected against moisture, in dry, ventilated rooms. Outdoor storage is not suitable. -Please note that incorrect storage, regardless of its duration, may cause irreversible distortion to the sheets. -Foreign bodies or impurities in the pallet of sheets can lead to impressions and damage to the surface of the board. -Ensure that sufficiently large and sturdy bases, e.g. pallets, are used for the transportation of stacked sheets. The sheets on the pallet must be secured against slipping. -Sheets / boards must not be moved against each other; they should be moved individually by hand or with suction equipment.