Glazing Vision Wall Abutted Skylight - Flushglaze
Flushglaze Eaves Skylight
FLUSHGLAZE EAVES SKYLIGHT
The eaves system takes the Flushglaze concept one step further by allowing vertically glazed sections to be connected to overhead glazing. In most cases a silicone seal is all that’s needed to bond these sections together.
information
NAME
Eaves
BRAND
Glazing Vision
PROPERTIES
- UV Protection
- Thermal Insulation
APPLICATIONS
- Residential
- Commercial
MATERIAL
- Metal
- Glass
TYPE
Fixed eaves skylight
TYPE OF GLASS
Laminated glass
DETAIL
This product is robust and long-lasting, boasting excellent thermal performance and air tightness.
CHARACTERISTICS
- Durable
- Minimal frame
- Low e glazing
- Laminated safety glass
SPAN
Min : 16” / Max : 157”
TOP SECTION PITCH
Min : 5/8” : 12” (3°) / Max : 12” : 12” (45°)
STANDARD COLORS
Qualicoat approved RAL 7015 slate grey outer, no inner framework is visible.
DIMENSIONS
- Width : Min 16” / Max 78”
- Height : Min 16” / Max 157”
- Wall Offset : Min 0” / Max 3-7/8”
CERTIFICATION
- BBA certified and approved
- Secured by design to LPS2081/1
- Approved by the Loss Prevention Certification Board
INTENDED USE
Fixed skylight to provide natural daylight and weather resistance. The product is fixed and does not open.
EASY CLEAN COATING
A coating applied to the external face of the glass that facilitates water run-off. Helps the glass stay cleaner for longer and makes cleaning easier.
TOP / VERTICAL SECTION AREA
- Min : 1.8 ft2
- Max : 55.9 ft2
USE
Skylight to be fixed to walls on up to three sides
GLAZING
A wide variety of glazing specifications are available for this product. Your technical sales advisor will be happy to answer any questions regarding specific glass specifications or glazing performance requirements. Otherwise, quotes include suitable and cost effective glazing proposals.
OPTIONAL EXTRAS
The following optional extras are available for this standard product at additional cost:
SPECIAL COLOR
This product has a single color as standard. This can be swapped for a special color.
EASY CLEAN COATING
A coating applied to the external face of the glass that facilitates water run-off. Helps the glass stay cleaner for longer and makes cleaning easier.
KEY FEATURES
- No visible internal framework
- No external capping
- Heat soak tested low e safety glass as standard
- Modular options available for larger areas
- The joint locks the panes into place without obstructing the view.
- Minimal framework means no water leaking inside.
- Silicone seal, aluminium angle or glass fin support
- Standard and custom size options and configurations available.
PERFORMANCE AND WEATHERTIGHTNESS
The aluminum frame of the product employs a foam tape to thermally isolate the frame from the interior of the building. Structural integrity is assured through the use of finite element analysis (FEA) and testing.
U-factors are calculated for each product and will be supplied in our quote. Further information and specific performance details can be obtained from your technical sales advisor.
The product is sealed to the curb using silicone and fixed in place with structural fixings which are concealed with lead (or other material) flashing leaving a sleek external finish. The product has been thoroughly tested.