EGGER Flammex - Flame Retardant Products
Eurodekor Flammex E1 P2 CE
EURODEKOR FLAMMEX E1 P2 CE
Eurodekor Flammex E1 P2 CE designates flame retardant decorative melamine-resin-coated chipboard for furniture and interior design with increased requirements for fire behaviour.
Flammex boards meet the requirements of the European fire classification EUROCLASS B-s2, d0 according to EN 13501-1.
information
POSSIBLE SUBSTRATES
EGGER Eurospan raw chipboard, EGGER MDF, EGGER Eurolight lightweight board.
BRAND
Egger
PRODUCT TYPE
Wall panels & Flooring
CHARACTERISTICS
Low flammability, Medium smoke emission, Low heat release, No flaming droplets
TRANSPARENCY
- 68% regional wood origin
- 85% material from renewable resources
- 100% verified legal wood origin 61% of that certified
- 21% recycled material 40% by products from the sawmll industry and pre consumer recycling wood
USE
Furniture and interior design
USE IN CONSTRUCTION
Interior
APPLICATIONS
Furniture and interior design with increased requirements for fire behaviour: wall claddings, partition walls, doors
MATERIAL
EGGER Eurodekor materials are melamine faced wood based boards for interior applications such as furniture and interior decoration.
DESCRIPTION
1. Pallet label : Positioning see drawing. The pallet label is glued on the protective top board and folded over the edge.
2. Eurospan block : 5 blocks; min. 38x80 mm if 40’ container or min. 15-19x80 mm if 20’ Container. Position on the pallet see drawing. PET straps in green, dimension 15,5 x 1,0 mm
3. Protection board top & bottom : from Eurospan raw chipboard or Eurodekor 3 rd quality. Thickness ≥7 mm to ≤19 mm
TOLERANCES TOTAL THICKNESS
The total thickness is defined as the substrate thickness including the coatings on both sides of the boards.
FLATNESS
Valid for equally balanced weight of decorative papers on both sides.
EURODEKOR PLUS
Tested with 19 mm thick EN312-P2 particleboard core board.
SCRATCH RESISTANCE
Not including decors with pearlescent effect.
PROPERTY
Without air gap behind the wood-based material.
ANTIMICROBIAL PROPERTY
The hygienically sealed and closed surface of this product is 99.9% virus, germ and bacteria free 24 hours after being cleaned and sanitized. The product does not contain a known substance that is intended to prevent, destroy, repel or mitigate a pest, and our product is not a device that is intended to trap, destroy, repel or mitigate pests.
RESISTANCE AGAINST HEAT
The resistance against heat of Eurodekor materials differs between long and short periods of heat exposure. For long and continuous periods of heat exposure, a maximum temperature of 50°C (122°F) is applicable. We kindly advise that continuous exposure in temperatures of over 50°C (122°F) may result in surface defects such as cracks. Installations of technical equipment that emit heat, for instance laptops, require an appropriate distance between heat source and surface to avoid heat accumulation and allow air and temperature circulation.
DOWNLOADS
↓ Eurodekor (PDF)
↓ Technical data sheet
↓ Resistance of EGGER surfaces to disinfectant (PDF)
↓ Container Packaging – Eurodekor/Eurodekor Plus
↓ Eurodekor tool recommendation Leuco (PDF)
↓ EGGER Eurodekor E1 GFE (English/PDF) CRIPTION
↓ Antibacterial properties of EGGER melamine resin surfaces (PDF)
↓ Availability Guide Decorative Collection 2020-22 (PDF) Specification
↓ Handbook (PDF) Flammex products - preventiv fire protection (PDF)
↓ Cleaning and care recommendations for EGGER product surfaces without EPSC (PDF)
↓ Eurodekor Flammex and Eurodekor MDF Flammex - reaction to fire for interior non-structural uses (PDF)