Egger Laminates Flammex -Flame-Retardant Coreboards
LAMINATES FLAMMEX - Flame Retardant COREBOARDS
LAMINATES FLAMMEX - FLAME RETARDANT COREBOARDS
Flammex laminates are classified as type F = flame-retardant in accordance with the standard. They are suitable as decorative and low flammability coating material in combination with flame-retardant coreboards.
INFORMATION
DIMENSIONS
- Maximum Length : 5,600 mm
- Minimum Length : 800 mm
- Width : 1,310 mm
USE
Furniture and interior design
NOMINAL THICKNESSES
0.60 and 0.80 mm
REACTIVITY
- Storage
- Transport
- Not Reactive under Normal Conditions of Use
HAZARDOUS DECOMPOSITION PRODUCTS
Hazardous decomposition may occur Thermal and/or Thermal Oxidative decomposition can produce irritating and Toxic Fumes and Gases
INCOMPATIBLE MATERIALS
- Acids(Strong)
- Oxidizers(strong)
TYPE OF MATERIAL
HGF (Horizontal General-purpose Flame-retardant)
STANDARD
Flame-Retardant Coreboards
PRODUCT TYPE
Laminates Flammex
CHEMICAL STABILITY
Stable under recommended storage conditions
Conditions to be avoided : No decomposition if used according to specifications
DOWNLOADS
↓ Technical information
↓ Safety instructions
↓ Certificate
↓ Catalog
↓ Environmental product declaration
BRAND
Egger
PRODUCTION
Made in Italy
PRODUCT AVAILABILITY
Decors from the EGGER Collection Decorative and the EGGER Industry Pool are produced to order, subject to a minimum order quantity of 260 m² per decor. Depending upon the nominal thickness, the laminate can be delivered in sheet form and/or roll format.
CONDITIONS TO AVOID
- Exposure to water
- Ignition source
- High relative humidity
- High temperature
APPLICATIONS
- Partition walls
- Interior doors
- Furniture and interior design
- Shopfitting and trade fair construction
- Areas with increased fire resistance requirements
DETAIL
Combinations with corresponding composite elements enable applications with increased requirements for fire resistance. They meet the requirements of the German building material class B1 and of the French reaction to fire class M1.
ADVANTAGES
- Low flammability
- Low smoke generation
- No flaming droplets
- Resistant to wear, impact and scratches
- Antibacterial surface property in accordance with ISO 22196 (=JIS Z 2801)
FIRE BEHAVIOUR
EGGER Laminate Flammex meets the specific requirements of building materials class B1 in accordance with DIN 4102-1: 1998-05 as well as the French fire behaviour class M1 in accordance with NF P 92-501. EGGER Laminate Flammex is a building material usually used for the lamination of laminated bonded boards. In the event of a fire, laminate bonded boards meet the special requirements of EN 13501-1, provided they are bonded to flame-retardant wood-based substrates.
QUALITY CHARACTERISTICS/TECHNICAL DATA
| PROPERTY | TEST STANDARD | UNIT OR FEATURE | VALUE |
|---|---|---|---|
| Thickness | EN 438-2 | Mm | ± 0.10 |
| Length and Width | EN 438-2 | Mm | +10/-0 |
| Flatness | EN 438-2 | mm/m (max.) | 60 |
| Resistance to surface wear | EN 438-2 | Revolutions (min.) Initial point | 150 |
| Resistance to impact by small diameter ball | EN 438-2 | N (min) | depending on : - 0,80 mm nominal thickness ≥ 20 - 0,60 mm nominal thickness ≥ 15 |
| Resistance to scratching | EN 438-2 | Rating (min) : - Smooth finishes - Textured finishes | - 2 - 3 |
| Resistance to water vapour | EN 438-2 | Rating (min.) | 4 |
| Resistance to dry heat (160 °C) | EN 438-2 | Rating (min.) | 4 |
| Dimensional stability at elevated temperatures | EN 438-2 | % max - Longitudinal direction - Cross-Longitudinal | - 0.55 - 1.05 |
| Resistance to wet heat (100 °C) | EN 438-2 | Rating (min.) | 4 |
| Resistance to staining | EN 438-2 | Rating (min.) - Groups 1 and 2 - Group 3 | - 5 - 4 |
| Lightfastness (Xenon arc lamp) | EN 438-2 | Grey scale rating | 4 bis 5 |