Sanifos 610 GR Pumping Station

SANIFOS 610 GR PUMPING STATION

Sanifos 610 GR  Pumping Station

SANIFOS 610 GR PUMPING STATION

The Sanifos 610 GR is a packaged pumping station suitable for single dwelling residential or commercial use. It is an efficient solution where gravity reliant sewerage are not possible due to limited site access and site constraints such as property sloping away from the sewer infrastructure

Sanifos 610 GR is an automatic lifting station for residential or industrial waste. It can take waste from a toilet, basin, bath, shower, bidet, washing machine, dishwasher and sink.

It is designed to take waste from a single residential dwelling with multiple storeys including bathroom, kitchen, utility room etc. It comes with a load balanced cutter with high performance characteristics to prevent clogging. It boasts a powerful automatic motor with quiet operation.

The Sanifos 610 GR has a 610 litre storage tank which is high-density polyethylene and offers high mechanical resistance and is resistant to chemical attack. It offers easy handling for installation below ground level. The Sanifos 610 GR has six inlets that can take up to 125 mm, and it discharges through 40 or 50 mm pipework. The Sanifos comes with a 2 year warranty.

Sanifos 610 GR comes with a smart control box, tank with pre mounted hydraulics s, 2 isolation valves, 2 non-return valves and 3 floats installed in the tank. It also comes with an external wired alarm for added peace of mind. It offers 4 drilling zones to allow access into the tank where needed for your project and extensions are available for the Sanifos should they be needed. 

INFORMATION

BARCODE

3308815081687

VOLTAGE

230 V

FREQUENCY

50-60 Hz

TYPE OF CONTROL BOX

Smart

MATERIALS

- Tank : PE
- Pipework :  PVC

MIN. INCOMING WATER CONNECTION WITHOUT EXTENSION

325 mm

MAX. INCOMING WATER CONNECTION WITH EXTENSION

1070 mm

POWER OUTPUT P2

1050 W

POWER CONSUMPTION P1

1500 W

NUMBER OF PUMPS

1

ELECTRICAL CLASS

I

MAXIMUM IMMERSION DEPTH

5 m

POWER CABLE: LENGTH

10 m

POWER CABLE: TYPE, SECTION

H07 RN-F 3G, 1.5 mm²

FACTORY CODE

SANIFOS6101GRSPS

MAXIMUM FLOW RATE

16 m³/h

RPM (REVOLUTION PER MINUTE)

2800

MOTOR INSULATION CLASS

F

GROSS WEIGHT

100 kg

MAX. HEAD (Q0)

14 m

ALARM LEVEL

570 mm

USEABLE VOLUME

206 L

EXTERNAL INLET DIAMETER

50, 100 mm

TOTAL VOLUME

610 L

POWER CABLE: LENGTH

10 m

DISCHARGE PIPEWORK

50 mm

EXT. VENTILATION DIAMETER

75 mm

TYPE OF IMPELLER

Grinder

TYPE OF ACTIVATION

Float

Sanifos 610 GR  Pumping Station

DESIGN

-Designed, made and tested in our factory in France and with 60 years of expertise and innovation, the Sanifos offers you peace of mind and with the back up from our service team there’s never been a better time to install a Saniflo -Designed for drainage of single dwellings or multiple storeys, incorporating WC, bathroom, kitchen, utility room -Single phase pump with cutter macerating technology -Pumps up to 11 metres vertical with a maximum of 48 cubic metres per hour flow rate
- Fully packaged including alarm

FLOW RATE PERFORMANCE CHART

Sanifos 610 GR  Pumping Station

TECHNICAL DRAWINGS

Sanifos 610 GR  Pumping Station
Sanifos 610 GR  Pumping Station
Sanifos 610 GR  Pumping Station