Hollaender VUE™ handrail system
VUE™ HANDRAIL SYSTEM
VUE™ HANDRAIL SYSTEM
Hollaender’s VUE™ railing for glass and acrylic infill panels offers what architects and owners the two most desirable features:
- Transparency
- Visibility
The VUE™ handrail system is a post mounted glass system where the glass panels are held at the posts, not the top and bottom rails. This minimizes the number of horizontal rails in the system which maximizes visibility.
Unlike most post-captured glass railing systems on the market, this railing frame is made of anodized aluminum, not stainless steel, resulting in much lower cost-per-foot.
Additional cost savings are created due to the fact that no holes are required in the glass as all glass panels are supported at the bottom. In addition, the VUE system, which uses 3/8” glass, is also less costly compared to shoe mounted structural glass, which must use ½” glass to meet codes.
INFORMATION
DOWNLOAD
↓ Product Sheet
PRODUCT TYPE
Railings
CODE COMPLIANCE
U.S. International Building Code 2009/2012/2015/2018 standards specific to guardrails, handrails and infill panel materials including glass.
PERFORMANCE REQUIREMENTS
All railings shall be supplied to conform to applicable sections of the following codes: International Building Code & ADAAG
GENERAL
The aluminum VUE™ railing system is designed for glass or resin infill panels, and is used in all railing appli-cations that must comply with IBC codes for structural strength and dimensions
OVERALL DIMENSIONS
- Height of top rail above walking surface: 42 in.
- Post spacing and Mounting : Determined by site conditions.
BRAND
Hollaender
TYPE
Railing For Glass And Acrylic Infill Panels
MATERIALS
-Posts : Aluminum 6005-T5, 1 ½” IPS (48.2 mm O.D.) Schedule 80 Wall
-Rails : Aluminum 6063-T6, 1 ½” IPS (48.2 mm O.D.) Schedule 40 Wall
-Fittings : Aluminum 6063-T6 (clear anodized)
-Base Flanges : Cast Aluminum
-Fasteners : Stainless Steel 304 Alloy
DRAWINGS
