Dupont Styrofoam™ Brand Cladmate™ Cm20
STYROFOAM™ BRAND CLADMATE™ CM20
STYROFOAM™ BRAND CLADMATE™ CM20
Styrofoam™ Brand Cladmate™ CM20 Extruded Polystyrene Insulation is a rigid foam insulation board with both shiplap edge and butt edge treatments. It is designed for use in residential and commercial applications where a higher compressive strength is not needed.
The Styrofoam™ Brand XPS product line gives you the proven thermal and moisture performance of the original XPS, plus the product options you need to design and build energy-efficient, resilient structures all the way to the top. It’s lightweight and easy to install, which makes the work go faster, and it’s readily available through our wide distributor network. When and where you need it, Styrofoam™ Brand is there.
INFORMATION
PROVIDES A CONTINUOUS LAYER OF INSULATION
Reduces thermal bridging
HIGH MOISTURE RESISTANCE
Reduced potential for condensation in wall cavities
APPLICATIONS
- Residential
- Commercial Buildings
HE XPS SOLUTION WHEN A HIGHER COMPRESSIVE STRENGTH IS NOT REQUIRED
Whether it’s new construction or a retrofit application, DuPont™ Styrofoam™ Brand Cladmate™ Extruded Polystyrene Insulation can help you reduce the potential for moisture condensation in wall cavities and improve energy efficiency in both residential and commercial buildings.
FORMAT
Foam Board
DOWNLOAD
↓ Data Sheet
INCREASED ENERGY EFFICIENCY
- Helps keep indoor temperature consistent
- Helps reduce heating and cooling costs
USE
- Interior Frame Wall Sheathing
- Exterior Or Interior Masonry Wall Insulation
AVAILABLE SIZES
Product thicknesses and R-values are shown in Table 1. Not all products are available in all areas. Consult your DuPont representative about other sizes and lead time requirements
EASE OF INSTALLATION
- Easy to handle, cut and install
- Available in several thicknesses with an R-value of 5.0 per inch
- Highly moisture resistant with 20 psi compressive strength
- Available in shiplap edge and butt edge (depending on board thickness)
CHARACTERISTICS
- Rigid Boards
- Shiplap Edges
- Easy Installation
- Energy Efficiency
SUSTAINABLE SOLUTIONS
Styrofoam™ Brand Cladmate™ CM20 Insulation uses BluEdge™ technology. It is hydrochlorofluorocarbon (HCFC) free with zero ozone depletion potential. Styrofoam™ Brand Cladmate™ CM20 Insulation is reusable in many applications and contains an average of 20% pre-consumer recycled content certified by ULEnvironment Inc.
PHYSICAL PROPERTIES
| PROPERTIES | METHOD | UNIT | VALUE |
|---|---|---|---|
| Thermal Resistance per in. (25 mm) @ 75°F (24°C) mean temp.1 | ASTM C518 | Btu•in/ft2•hr•°F, min. | 5.0 (0.88) |
| Compressive Strength2 | ASTM D1621 | psi (kPa) | 20 psi (140 kPa) |
| Water Absorption | ASTM D2842 | % by volume | 0.7 |
| Water Vapor Permeance3 | ASTM E96 | perm (ng/Pa•s•m2) | 1.5 (86) |
| Maximum Use Temperature | - | °F (°C) | 165 (74) |
| Coefficient of Linear Thermal Expansion | ASTM D696 | in/in•°F (mm/m•°C) | 3.5 x 10-5 (6.3 x 10-2) |
