Unilinpanels Fibromax Pro Board
FIBROMAX PRO BOARD
FIBROMAX PRO BOARD
Non-structural MDF board for industrial processing and interior applications
High quality MDF board (L-MDF according EN 622-5) with a hard, fine and smoothly sanded surface.
Fibromax Pro can be used for non-loading bearing applications in dry conditions. This board has low formaldehyde emission (E1 class).
Fibromax Pro is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management.
INFORMATION
AVAILABLE FIRE REACTION CLASSES
- D-s2-d0
- E
FORMALDEHYDE CLASS
Standard
DRY CONDITIONS
Service Class 1
CHARACTERISTICS
- Non-load-bearing
- Made From Recovered Wood
- Moisture Resistant
- Low Formaldehyde Emission
CERTIFICATES
UNILIN Division Panels is actively committed to sustainable forest management. Fibromax Pro is available on demand with PEFC and FSC labelling.
DENSITY
High
MATERIAL
MDF
PRODUCTION
- 100% recovered wood
- 100% pre-consumer wood
BOARD
High-end MDF board for industrial processing in dry environments.
USE
In Moisture-prone or Dry Conditions
CHARACTERISTICS
L-MDF (EN 622-5)
CE NORM
L.MDF
PROPERTY
Moisture Resistant
APPLICATIONS
Fibromax Pro is perfectly suited to interior finishes. Skirting boards and profiles are but two of the many applications for which Fibromax Pro is an excellent choice. The high-quality surface of Fibromax Pro can be finished with melamine, veneer, lacquer or paint.
TECHNICAL SPECIFICATIONS
Fibromax Pro meets the general requirements and comes under formaldehyde emission class E1 as described in Table 1 of EN Standard 622-1.
| GENERAL CHARACTERISTICS + STANDARD | UNIT | AVERAGE VALUES |
|---|---|---|
| Thickness EN 324-1 | mm | 6, 8, 10, 12, 16, 19, 22 |
| Technical characteristics + Standard | - | 5/95 Percentile Values |
| Bending strength EN 310 | N/mm2 | 20, 18, 15 |
| Bending stiffness EN 310 | N/mm2 | 1600, 1700, 1500 |
| Internal bond EN 319 | N/mm2 | 0.45 |
| Swelling/24h EN 317 | % | 20, 16, 14, 12 |