Unilinpanels Fibromax MR MDF Board
FIBROMAX MR MDF BOARD
FIBROMAX MR MDF BOARD
Moisture-resistant and non-structural MDF board for industrial processing and interior applications
High density, moisture resistant MDF board (MDF.H according EN 622-5) with a hard, fine and smoothly sanded surface.
For easy identification, the panel is coloured green in the mass. Fibromax MR can be used for non-loading bearing applications in humid conditions. This board has low formaldehyde emission (E1 class).
Fibromax MR is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management.
INFORMATION
APPLICATIONS
Interior and Furniture
MATERIAL
MDF
DENSITY
High
CE NORM
MDF.H
HUMID CONDITIONS
Service Class 2
CHARACTERISTICS
- Non-load-bearing
- Made From Recovered Wood
- Moisture Resistant
- Low Formaldehyde Emission
PROPERTY
Moisture Resistant
FORMALDEHYDE CLASS
Standard
PRODUCTION
- 100% recovered wood
- 100% pre-consumer wood
AVAILABLE FIRE REACTION CLASSES
- D-s2-d0
- E
USE
In Moisture-prone or Dry Conditions
CHARACTERISTICS
- MDF.H (EN 622-5)
- Moisture resistant
TECHNICAL SPECIFICATIONS
| GENERAL CHARACTERISTICS + STANDARD | UNIT | AVERAGE VALUES |
|---|---|---|
| Thickness EN 324-1 | mm | 6, 9, 12, 15, 16, 18, 19, 22, 28, 30 |
| Technical characteristics + Standard | - | 5/95 Percentile Values |
| Bending strength EN 310 | N/mm2 | 27, 26, 24, 22 |
| Bending stiffness EN 310 | N/mm2 | 2700, 2500, 2400, 2300 |
| Internal bond EN 319 | N/mm2 | 0.70, 0.80, 0.75 |
| Swelling/24h EN 317 | % | 18, 12, 10, 8, 7 |
| Internal bond after cyclic test EN 321 option 1 | N/mm2 | 0.30, 0.25, 0.20, 0.15 |
| Swelling/24h after cyclic test EN 321 option 1 | % | 25, 19, 16, 15 |