Ash Australian Oak Floor Tile
AUSTRALIAN OAK FLOOR TILE
AUSTRALIAN OAK FLOOR TILE
Trends change – our quality doesn’t. Meet the attractive, world-class engineered timber flooring.
Australian Oak engineered hardwood flooring is the combination of a beautiful hardwood floor, a hard-wearing coating and a super stable substrate – manufactured to the quality you’d expect from Australia’s largest vertically integrated hardwood manufacturer.
The resulting product is a floor of stunning architectural appearance that increases stability and offers speedy installation. This all comes at a financial saving in time and material cost. Australian Oak timber is our answer to the oak floorings of the world with a uniquely Australian twist. Australian Oak Flooring has an unmatched aesthetic charm that will add character and warmth with every board.
INFORMATION
CHARACTERISTICS
- Stable
- Durable
- Crown cut grain
- Customisable
- Hard-wearing coating
BRAND
Ash
PRODUCT TYPE
Floor Tile
PRODUCTION
Made in Australia
MATERIAL
Oak Wood
BENDING
Satisfactory
APPLICATIONS
Residential & Commercial/retail
USE
Hardwood flooring and wall lining
GUARANTEE
25-year structural warranty, 15-year wear warranty
DURABILITY
Above ground – Class 3
Below ground – Class 4
(Refer to IronAsh for clear H3 treatment)
STABILITY
High (quarter sawn)
CUTTING
Very Good
GLUEING
Very Good
LYCTUS SUSCEPTIBLE
No
NAIL HOLDING
Very Good
COLOUR
Pale pink to straw
SIZE
190mm x 15mm – available with a 2mm or 4mm wear layer
GRAIN
Straight open and even grained with a uniform texture
FLOORING STEPS
Completely customisable engineered flooring with an Australian twist
- Customise In 5 Easy Steps
- Crown Cut Victorian Ash Wear Layer
- Led-cured Hardwax Coating
- Balanced Construction
JANKA
4.9 kN (seasoned)
IMPACT RESISTANCE
High – 18 joules
MOISTURE CONTENT
Medium density 660 KG/m3 at 12% moisture content. Seasoned to comply with the Australian Standard AS2796 (9% – 14%) with the average moisture content ranging between 10% and 12%.
UNIT SHRINKAGE (KD)
Measurable movement in service – LowRadial: 0.22% of board dimension per 1% moisture content change.Tangential: 0.35% of board dimension per 1% moisture content change
FIRE
- Ignitability index: 14
- Spread of flame index: 8
- Heat Evolved index: 7
- Smoke development index: 3
- Flooring AS/ISO 9239.1
- Wall and Ceiling lining AS/NZS3837: 1998
- Refer Australian Standard AS1530 Part 3 and Building Code of Australia
- Critical Radiant Heat Flux: More than 2.2kW/m2 and less than 4.5kW/m2
- Smoke development Rate: Less than 750% -min
- Average extinction area: less than 250m2/kgMaterial Group No: 3 (unless coated to meet Group 1 & 2)
- Bushfire Attack level: BAL 19 High (BAL-29 and BAL-40 in proprietary systems)
Benefits
LED Cured Hardwax Oil
Crown Cut (Back Sawn)
Cross-laminated Orientation
PEFC Controlled
Customisable
Easy to lay
Can sand and re-polish
Pre-finished
Balanced Construction