Unilin Belspan TG Chipboard
BELSPAN TG CHIPBOARD
BELSPAN TG CHIPBOARD
Non-structural P2 chipboard with tongue and groove. Belspan TG is suitable for dry conditions, service class 1, mainly used for non load bearing separation walls and wall linings. Belspan TG is made from 100% recovered wood: up to 90% post-consumer wood, supplemented by 10% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management.
INFORMATION
BRAND
Unilin
PRODUCT TYPE
Chipboard
COLLECTION
Belspan
PRODUCTION
Made in Belgium
FORMAT
- Slabs
- Plates
- Panels
USE
- Separation walls
- Wall linings
DENSITY
Standard
APPLICATIONS
Interior Dry Coditions
CHARACTERISTICS
- Low formaldehyde
- Non-load-bearing
- Tongue and groove profile
- Made from recovered wood
CE NORM
P2
DRY CONDITIONS
Service class 1
FORMALDEHYDE CLASS
Standard
FIRE REACTION CLASSES
D-s2-d0
HIGH-QUALITY CHIPBOARD FOR INTERIOR AND FURNITURE APPLICATIONS
Belspan panels have a strong, screwable core and are perfectly suited to industrial processing for furniture and interior design. The board is suitable for applications in service class 1 (limited temperature and atmospheric humidity), and can only be used in biological hazard class 1 of EN Standard 335-3.
CERTIFICATES
Unilin Division Panels is actively committed to sustainable forest management. Belspan is available on demand with PEFC and FSC® labelling
APPLICATIONS
Belspan chipboard can easily be finished with melamine, finishing oil, lacquer, veneer or laminate. This is the reason why the boards are excellent for interior applicatinos and furniture production.
FINISH
Belspan is available as standard with a fine, sanded surface that is particularly suited to finishing with melamine, finishing foil, lacquer, veneer or laminate.
TECHNICAL SPECIFICATIONS
| Characteristics + Standard | Unit | Average Values |
|---|---|---|
| Thickness EN 324-1 | mm | 8/10/12/15/16/18/19/22/25/28/38 |
| Moisture level EN 322 | % | 6-10 |
| Technical Characteristics | - | 5/95 Percentile values |
| Bending strength EN 310 | N/mm² | 11.0/10.5/9.5/8.5 |
| Internal bond EN 319 | N/mm² | 0.40/0.35/0.30/0.25/0.20 |
| Bending stiffness EN 310 | N/mm² | 1800/1500/1350/1200 |
| Surface soundness EN 311 | N/mm² | 0.80 |
