Egger Eurodekor Flammex E1 P2 CE Chipboard
EURODEKOR FLAMMEX E1 P2 CE CHIPBOARD
EURODEKOR FLAMMEX E1 P2 CE CHIPBOARD
Eurodekor Flammex E1 P2 CE designates flame retardant decorative melamine-resin-coated chipboard for furniture and interior design with increased requirements for fire behaviour. Flammex boards meet the requirements of the European fire classification EUROCLASS B-s2, d0 according to EN 13501-1.
INFORMATION
BRAND
Egger
PRODUCT TYPE
Insulation Accessories
POSSIBLE SUBSTRATES
EGGER Eurospanraw chipboard, EGGER MDF, EGGER Eurolight lightweight board.
MATERIAL DESCRIPTION
EGGER Eurodekor materials are melamine faced wood based boards for interior applications such as furniture and interior decoration.
ADVANTAGES
- Low flammability
- Medium smoke production
- Low heat release
- No flaming droplets
APPLICATIONS
Furniture and interior design (e.g. partition walls, wall cladding) with increased requirements for fire behaviour.
FORMALDEHYDE EMISSION CLASSES
The Formaldehyde emission classes depend on the used substrate. Information in regards to the Formaldehyde emission of your preferred substrate can be found in the technical datasheets of our substrates. Please visit www.egger.com for further information.
FORMAT
Sheet
USE
Furniture and interior design
RESISTANCE AGAINST HEAT
The resistance against heat of Eurodekor materials differs between long and short periods of heat exposure. For long and continuous periods of heat exposure, a maximum temperature of 50°C (122°F) is applicable. We kindly advise that continuous exposure in temperatures of over 50°C (122°F) may result in surface defects such as cracks. Installations of technical equipment that emit heat, for instance laptops, require an appropriate distance between heat source and surface to avoid heat accumulation and allow air and temperature circulation.
FORMALDEHYDE EMISSION CLASSES
The Formaldehyde emission classes depend on the used substrate. Information in regards to the Formaldehyde emission of your preferred substrate can be found in the technical datasheets of our substrates. Please visit www.egger.com for further information.
MELAMINE RESINS
For the coating of Eurodekor wood-based panels, we only use polymerised resins which do not exhibit any hazardous properties after curing the product and are harmless for the intended use of the product.
In particular, free melamine is not contained in Eurodekor wood-based panels in a concentration that would trigger additional information obligations, for example under Regulation (EC) No. 1907/2006 (REACH).
Furthermore, Eurodekor faced wood-based panels naturally comply with the existing migration thresholds according to Regulation (EU) No. 10/2011 on plastic materials and articles intended to come into contact with food.
ANTIMICROBIAL PROPERTY
The hygienically sealed and closed surface of this product is 99.9% virus, germ and bacteria free 24 hours after being cleaned and sanitized. The product does not contain a known substance that is intended to prevent, destroy, repel or mitigate a pest, and our product is not a device that is intended to trap, destroy, repel or mitigate pests.
DOWNLOAD
↓ Container Packaging – Eurodekor/Eurodekor Plus (PDF)
↓ Technical Datasheet Eurodekor (PDF)
↓ Eurodekor tool recommendation Leuco (PDF)
↓ Eurodekor (PDF)
↓ EGGER Eurodekor E1 GFE (English/PDF)
↓ Antibacterial properties of EGGER melamine resin surfaces (PDF)
↓ Cleaning and care recommendations for EGGER product surfaces without EPSC (PDF)
↓ Resistance of EGGER surfaces to disinfectant (PDF)
↓ Eurodekor Flammex and Eurodekor MDF Flammex - reaction to fire for interior non-structural uses (PDF)
↓ Availability Guide Decorative Collection 2020-22 (PDF)
↓ Specification Handbook (PDF)
↓ Flammex products - preventiv fire protection (PDF)