Saniflo Sanifos 1000+
SANIFOS 1000+ PRE-PACKAGED PUMP
SANIFOS 1000+ PRE-PACKAGED PUMP STATION
The Sanifos 1000+ pre-packaged pump station includes pump, floats, alarm and control panel. Wastewater is run from your building to this remote tank and is then automatically pumped to the main sewerage line according to pre-set float levels.
The Sanifos 1000+ will cope with all combined waste water from your building.
The tank comes with pre-assembled pump, isolation valve, non-return valve, associated internal pipework three floats and alarm and strobe to signal high level events. The SANIFOS 1000+ has been designed for use externally, it can be buried near the property to pump wastewater or storm water up to gravity services.
INFORMATION
BRAND
Saniflo
PRODUCTION
Made In Australia
USE
In-ground pump
IP RATING
IP68
APPLICATIONS
- Exterior
- Kitchen
- Laundry
- Bathroom
- Residential
- Commercial
CHARACTERISTICS
- Varied sizes
- Underground installation
DISCHARGE PIPE DIAMETER
DN50 (Ø ext. 50 mm)
VOLTAGE
220-240V/50Hz
TANK VOLUME
1000 L
MAXIMUM FLOW RATE
17 m³ / h
MAX. TEMPERATURE (5 MIN)
55°C Max (intermittent)
INLET PIPEWORK
100 mm
MOTOR POWER
100 mm
DOWNLOADS
↓ Data sheet
SIZE
Sanipump ZFS 71.1 pump for wastewater where high lift is required
INSTALLATION
Underground
PUMP
Pre-Assembled
PUMP
Automatically
CHOICE OF 2 PUMPS
-Sanipump GR Cutter pump for wastewater -Single or Twin Pump options -Sanipump ZFS 71.1 pump for wastewater where high lift is required
videoS