Hasslacher Group Glued Solid Timber Beam
GLUED SOLID TIMBER BEAM
GLUED SOLID TIMBER DUO/TRIO BEAM
The good-looking specialist
All standard dimensions and standard lengths can be supplied at short notice thanks to our well-stocked and organized finished product warehouse for laminated beams DUO/TRIO.
information
PRODUCT STANDARD
EN 14080
MOISTURE CONTENT
12% ±2%
STRENGTH CLASSES
- C24
- C30 (on request)
AREAS OF APPLICATION
-Detached houses and apartment buildings -Multi-storey residential buildings -Use in the visible area with the highest visual requirements
THERMAL CONDUCTIVITY
l = 0.13 W/mK
STRUCTURAL FIRE RESISTANCE
0.80 mm/min in accordance to EN 1995-1-2
SHRINKAGE AND SWELLING BEHAVIOUR
- Perpendicular to the grain direction au,90 = 0.24% per 1% change in moisture content
- Parallel to the grain direction au,0 = 0.01% per 1% change in moisture content
WOOD SPECIES
Spruce Other types of wood on request
SURFACE QUALITIES
Visual quality Industrial quality
PRODUCT TYPE
Timber Beam
FIRE BEHAVIOUR
D-s2, d0 Dfl-s1 when used as floor covering
CROSS SECTIONS
-Heights : 100 to 240 mm
-Widths : DUO: 80 to 160 mm in 20 mm steps TRIO: 180 to 240 mm in 20 mm steps
-Lengths : Standard length: 13.5 m Special lengths: from 4 m up to 16 m Other cross sections are available on request
DOWNLOADS
↓ Data Sheet
LAMELLA THICKNESS
Lamella thicknesses: 40, 50, 60, 70 and 80 mm
ADVANTAGES
- No glued joint in the visible surface
- Crack-minimized due to wood that is cut free of heart centre
- High load-carrying capacity with low density
- High dimensional stability due to gluing and technical drying
- High fire resistance and chemical resistance
- High thermal insulation properties
- Natural, renewable and 100% recyclable building material
- Transparent light-coloured glue line
FORMALDEHYDE EMISSIONS
- E1 according to EN 717-1 (<0.1 ppm)
- Actual measured value: <0.01 ppm
DENSITY
For spruce, and depending on the strength class, approximately 400 kg/m³ to 500 kg/m³ in average
APPLICATION
High-rise building projects
DIFFUSION RESISTANCE
According to EN ISO 10456 m = 50 (dry) to 20 (wet)
AREAS OF USE
- Exposed roof structures as spars and purlins
- Exposed beam ceiling
- Support grid systems in the exposed area
- Industrial quality low-torsion planking
- Panel boards as wall and ceiling elements
- Glue laminated timber substitute in the industrial and visible quality range
BONDING
Melamine resin adhesive with bright glue line,adhesive type I according to EN 301 approved
for bonding loadbearing and non-loadbearing timber components, both indoors and outdoors.
DIMENSIONAL TOLERANCES
- Cross section : according to EN 14080
- Length : according to EN 390 or EN 14080
SERVICE CLASSES (EN 1995-1-1)
- Service class 1 heated interior
- Service class 2 roofed outdoor area