Fastmount® Mc-f10 Metal Clip Self Tapping Female 10kg
MC-F10 METAL CLIP SELF TAPPING FEMALE
MC-F10 METAL CLIP SELF TAPPING FEMALE 10KG
Female metal clip with black centre to indicate 10 kg pull out load. Compatible with MC-M5. Self taps into 20mm hole with MC-IT5. Screw fit installation with #5 gauge screws. For installation of wall panels only.
The MC-10 clip set is a combination of the MC-F10 (identified by black centre) and MC-M5 clips. The MC-F10 self taps and/or screw fixes into the substrate, and the MC-M5 self taps into the back of the panel. Innately fire resistant and ideal for heavy load bearing.
Refer to Panel Offset Guide for gap between substrate and panel, pull out and shear loads. Note: For use with wall panels only, not suitable for ceiling panel installation.
INFORMATION
CHARACTERISTICS
- Rapid Installation
- Fire Resistance and Heavy Load Bearing
BRAND
Fastmount®
PRODUCTION
Made in Italy
INSTALLATION
Partially exploded through section showing typical installation method
SPECIFICATION
The MC-10 clip set is a combination of the MC-F10 (identified by black centre) and MC-M5 clips. The MC-F10 self taps and/or screw fixes into the substrate, and the MC-M5 self taps into the back of the panel. Innately fire resistant and ideal for heavy load bearing. Refer to Panel Offset Guide for gap between substrate and panel, pull out and shear loads. Note: For use with wall panels only, not suitable for ceiling panel installation.
BENEFITS
- 5kg pull out load with MC-F5
- 10kg pull out load with MC-F10
- Stainless steel clip withstands high temperatures
- MC-SM5-VHBFR supplied with fire-resistant tape attached
- Simple install with rivet, screw (MC-SM5) or adhesive (MC-SM5-VHBFR)
CATEGORY
Metal Range
METAL MALE CLIP
Surface Mount
USE
- Interior Panels
- Alumnium Honeycomb Panels
- Lightweight Fire Rated Panels
- Fire-rated Heavyweight Panels
- High Density Panels
- Surface Mount Is Required
- Interior Fr Alucobond Panels
- Fire Rated Access Panels
APPLICATIONS
- Marine, architectural, aviation and RV
- Suitable for interior wall panels only
- Aluminium honeycomb panels
- Lightweight fire rated panels
- Fire-rated heavyweight panels
- High density panels, where surface mount is required
- Interior FR alucobond panels
- Fire rated access panels
MATERIAL
EZDA 3 triple plated, SS spring
DETAILS
Installation Guide MC-05 Clip Layout Guide TD
COMPATIBLE WITH
MC-SM5 Metal Male Surface Mount – Screw
- MC-SM5-VHBR Metal Male Surface Mount – Adhesive
- MC-05 Metal Clip Set
- MC-M5 Metal Clip Self Tapping Male
- MC-F5 Metal Clip Self Tapping Female 5kg
- MC-10 Maxi Metal Clip Set
