Gortergroup WAPT With Recessed Cover Floor Door

WAPT WITH RECESSED COVER FLOOR DOOR

The Gorter WAPT hinged floor door provides practical and safe access to the areas below.

The pan-type cover is suitable for pouring cement followed by tiling or the laying of floor covering (carpet, laminate, etc.).

STANDARD DIMENSIONS

- Dimension 1 : 600 x 600 mm
- Dimension 2 : 800 x 800 mm
- Dimension 3 : 1000 x 1000 mm
- Dimension 4 : 1000 x 1500 mm
- Dimension 5 : 1000 x 2000 mm

WEIGHT

- Weight 1 : 24 kg
- Weight 2 : 30 kg
- Weight 3 : 48 kg
- Weight 4 : 103 kg
- Weight 5 : 125 kg

INSIDE AND OUTSIDE USE - FOR CONCRETE FLOORS, TILES AND FLOOR COVERINGS

The reinforcing mesh supplied is placed in the cover when pouring cement. The cover is made of anodised aluminium, and the hatch is suitable for both inside and outside use. The powder-coated steel frame has an optional connection for a drainage system / rain water discharge.

COMBINATION WITH LADDERS AND STAIRS

Depending on the size and application, WAPT floor doors can be combined with a Gorter fixed vertical ladder, an extension ladder or a fixed staircase. A scissor stair can be used in some cases.

USAGE

Hinged floor doors are not recommended in situations subject to dynamic loads. The floor door is optionally available to support loadings specified by the customer.

HARDWARE

- Counterbalancing system for assisted opening and controlled closing
- Hinges
- Hold-open arm that engages automatically
- Snap latch with T-key and removable watertight plug on top cover
- Option: padlock hasps

GORTER HINGED, ALUMINIUM, RECESSED, FLOOR DOOR

- For inside and outside use
- In standard and special sizes
- Safe to operate with one hand
- The counter-balance system helps with opening and slows closing
- Automatic locking in open position and unlocking with one hand
- Door catch with removable crank and watertight plug on top side
- Safe handle on inside of cover (opening length > 1,000 mm)
- 5-year warranty on the floor door
- High-quality construction
- Rain water drain connection using 40 mm ø PVC sleeve (excl. sleeve)
- Reinforcing mesh supplied for pouring cement

GORTER® - COMPLETELY ASSEMBLED

-Frame ≤ 1250 mm: Channel type in anodized aluminium
-Frame > 1251 mm: Channel type in KTL (cathodic dip painting) treated steel
-Lid: Pan type in anodized aluminium, recess 25 mm, available with wire mesh
-For tiles or carpet
-Prepared with thread for u-PVC drainage coupling 40 mm (without coupling)