Raynor Steelform™ S-20 And S-24 Doors
STEELFORM™ S-20 AND S-24 DOORS
STEELFORM™ S-20 AND S-24 DOORS
Sectional Ribbed Doors
These benchmark sectional ribbed doors provide proven Raynor reliability and durability to meet, or exceed, the requirements of daily use.
The Raynor SteelForm S-20 and S-24 sectional ribbed doors, 20 and 24-Gauge doors are offered with the widest selection of quality features and options for the most common commercial door product applications.
FEATURES
DURABLE CONSTRUCTION
Constructed with stainless steel rivets and roll-formed tongue-in-groove meeting rails for maximum structural integrity, SteelForm S-20, S-24, S-16, and S-24C doors are built to withstand heavy use.
DECREASED ENERGY COSTS
SteelForm S-20 and S-24 doors help you reduce energy costs with a U-shaped, vinyl bottom weatherseal secured by a sturdy aluminum retainer.
JAMB SEAL
Jamb seal also helps to reduce air infiltration and decrease energy costs by sealing the side of the door when closed. Available in EPDM rubber or flexible vinyl flap.
INSULATION
SteelForm S-20 and S-24 doors are available with energy-saving insulation. Choose from white impact-resistant (shown) or steel (26, 24, or 20-gauge) back covers.
ENDURACOTE™
The Raynor EnduraCote hardware system comes with springs, track, and hardware that are powder coated to provide a clean, finished look and maximum protection against rust.
REMOVABLE CENTER POSTS
Carry-away, swing-up options available for extra-wide openings. Ideal for agricultural or airplane hangar applications.
CARBON MONOXIDE VENT
Allows you to channel fumes to the outside when the SteelForm door is closed. Available in a variety of sizes.
RUGGED HARDWARE AND SPRINGS
SteelForm S-20 and S-24 doors come packaged with the right combination of hardware, track, and springs to precisely match your door’s size and application and provide years of reliable service.
HEADER SEAL
Flexible, EPDM rubber flap header seal on S-20, S-24, S-16, and S-24C doors reduces air infiltration and energy costs by sealing the top of the door against the header.
SECTION JOINT SEAL
SteelForm S-20 and S-24 doors are available with a neoprene foam rubber section joint seal to help prevent airflow between sections.
SECURE LOCKS
In applications where control and access are important, choose from a variety of locking options to help keep your building secure. Locks come in both inside and outside variations.
CHOICE OF WINDOWS
Select either 24″ x 8″ or fullview window sections. Choose from a variety of glass, insulated glass, acrylic and polycarbonate styles to suit any application.
CUSTOMIZED TRACK AND HARDWARE
Track systems are supplied to fit special clearances, inclines, or contour applications. Hardware and track systems can be designed to fit any need. Additional trussing is available for special wind loading applications. A QuikClip™ pre-assembled track option is also available.
HIGH-CYCLE COUNTERBALANCE SYSTEM
For reliable operation in high traffic areas, choose high-cycle torsion springs with 25,000, 50,000, or 100,000 cycle life. For reduced maintenance and ultra-smooth operation in heavy-use applications, choose a weight counterbalance system.
INFORMATION
MATERIAL
Steel skin and Rugged hardware
GUARANTEE
Limited warranty: 10 years
COUNTERBALANCE SYSTEM
-Shafts : Tube (13-Gauge) or Solid (D-Shaft, 1″ Keyed, 1-1/4″ Keyed)
-Type : Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counterbalance
-Springs : Spring Inner Diameter: 2-1/4″, 3-1/2″ or 5-1/2″; Duplex or High Cycle (30K, 50K, 100K); Optional Black Powder Coat
COLORS
-SteelForm S-20 (Raynor SteelForm S-20 commercial sectional ribbed doors are available in White only.) -SteelForm S-24 (*Features the high performance PVDF coating (TRINAR® or equivalent) paint process that provides extended UV protection against fading.)
USE
Sectional Ribbed Doors
APPLICATIONS
- Commercial
- Industrial
TRACK
-Size : 2″ or 3″
-Gauge : 12, 13, 16-Gauge
-Finish : Galvanized or Optional White Powder Coat
-Type : Normal Headroom, Rear Mount Low Headroom, - Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour, and QuikClip™ Pre-Assembled Track Options
CHARACTERISTICS
- Strong
- Rust-resistant
- Reliable
- Durable
- High-security
DOOR
-Type: Commercial Sectional Garage Doors
-Model : SteelForm S-20 AND S-24
-Size : 40′ x 32′ Max (20-Gauge) or 32′ x 32′ Max (24-Gauge)
-Operation : Manual, Motor or Hand Chain
-IECC Thermal Performance : N/A
HARDWARE/ACCESSORIES
-Finish : Galvanized
-Pedestrian Door : NA
-Seal(s) : Climate Seal
-Optional Wind Loading : NA
-Posts : Swing-Up or Carry-Away
-Hinges : 11, 13, 14-Gauge or Hybrid
-Lock : Interior Slide Lock or Exterior Lock Bars
-Rollers : Standard (2″ or 3″) or Heavy Duty (2″ or 3″)
-Hanger Angle : 11, 13, 16-Gauge Galvanized or 13-Gauge White Powder Coated
TECHNICAL INFORMATION-PANEL SOLUTIONS
| DOOR WIDTH | NUMBER OF RAISED PANELS |
|---|---|
| Up to 9’2″ | 2 |
| 9′ 3″ – 12′ 2″ | 3 |
| 12′ 3″ – 16′ 2″ | 4 |
| 16′ 3″ – 20′ 2″ | 5 |
| 20′ 3″ – 24′ 2″ | 6 |
TECHNICAL INFORMATION-SECTION SOLUTIONS
| DOOR WIDTH | NUMBER OF SECTIONS |
|---|---|
| Up to 8’2″ | 4 |
| 8′ 3″ – 10′ 2″ | 5 |
| 10′ 3″ – 12′ 2″ | 6 |
| 12′ 3″ – 14′ 2″ | 7 |
| 14′ 3″ – 16′ 1″ | 8 |
SECTIONS
-Construction : 1 or 2-Layer Pan
-Material : Steel
-Surface Texture : Smooth Exterior
-Section Joint : Tongue-in-Groove
-Section Thickness : 2″
-Panel Configuration : NA
-Gauge : 20-Gauge (White Only) or 24-Gauge (All Colors)
-Stiles : End Stiles: 13 or 16-Gauge (depending on door width); Center Stiles: 16-Gauge
-Insulation : Optional Expanded Polystyrene (7.7 R-value) with 26 or 24-Gauge Steel Covers
-Windows : 24″ x 8″ or fullview window sections; glass: choose from a variety of standard or insulated glass, acrylic, and polycarbonate styles to suit any application
-Seals : Bottom Seal (3″, 4″ EPDM, or 3″ Yellow); Optional Header Seal
-Trussing :Wind Load: 20 P.S.F. Tested/13.3 P.S.F. Design Load (standard); Material: U-bar (18-Gauge or 20-Gauge); Sizes: 4″, 6″, or 8″
-Color : S-20: White only | S-24: White, Brown* or Beige* Raynor’s ColorWave™ optional post paint process with 1,500 Sherwin-Williams® colors *High performance PVDF coating (TRINAR® or equivalent)
SPECS/DRAWINGS
STANDARD DRAWINGS - 2-INCH TRACK/BRACKET-MOUNTED
| SHEETS | DRAWINGS | |
|---|---|---|
| Normal Headroom | DWG Drawing | |
| Lift Clearance | DWG Drawing | |
| Vertical Lift | DWG Drawing | |
| Low Headroom Front-Mount | DWG Drawing | |
| Low Headroom Rear-Mount | DWG Drawing |
STANDARD DRAWINGS - 2-INCH TRACK/ANGLE-MOUNTED
| SHEETS | DRAWINGS | |
|---|---|---|
| Normal Headroom | DWG Drawing | PDF |
| Lift Clearance | DWG Drawing | |
| Vertical Lift | DWG Drawing | PDF |
| Low Headroom Front-Mount | DWG Drawing | PDF |
| Low Headroom Rear-Mount | DWG Drawing | PDF |
STANDARD DRWAINGS - 3-INCH TRACK/ANGLE-MOUNTED
| SHEETS | DRAWINGS | |
|---|---|---|
| Normal Headroom | DWG Drawing | |
| Lift Clearance | DWG Drawing | |
| Vertical Lift | DWG Drawing | |
| Low Headroom Front-Mount | DWG Drawing | |
| Low Headroom Rear-Mount | DWG Drawing |