Raynor Alumaview® Av300 Garage Door
ALUMAVIEW® AV200 GARAGE DOOR
ALUMAVIEW® AV175 GARAGE DOOR
Aluminum Sectional Rail and Stile Doors
A full 3″ thick, the Raynor AlumaView AV300 aluminum sectional rail and stile door is the sturdiest door in the AlumaView family.
The increased thickness adds strength and durability. With the incorporation of the U-bar trussing inside the rails, there are no obstructions to your view.
The AV300 is the clear choice for auto dealerships, car washes, corrosive environments, police, fire and ambulance stations, quick lubes, repair facilities, restaurants, marinas, sports facilities, and buildings with large opening sizes.
FEATURES
AV175 FEATURES AND OPTIONS
Raynor AlumaView AV300 aluminum sectional rail and stile doors are available with numerous features and options, including those listed below.
YEARS OF DURABILITY
AlumaView AV300 door sections are clear-anodized for maximum durability and are designed to withstand minimum wind loads of 20 p.s.f. Higher pressure ratings are available upon request.
DECREASED ENERGY COSTS
AlumaView doors help you reduce energy costs with a U-shaped, vinyl bottom weatherseal secured by a sturdy aluminum retainer.
INTEGRAL U-BAR
Integral U-bar construction within the rails of the AV300 creates added strength to the section panels and provides for a clean look on the interior of the door by removing trussing obstructions from visible areas (only required for doors wider than 18’2″).
CUSTOMIZED TRACK*
Track systems are supplied to fit special clearances, inclines, or contour applications. Hardware and track systems can be customized to fit any need. Additional trussing is available for special wind loading applications. A QuikClip™ pre-assembled track option is also available.
*Some options may be limited to door size or model.
JAMB SEAL
EPDM rubber jamb seal also helps to reduce air infiltration and decrease energy costs by sealing the side of the AV200 door when closed.
ENDURACOTE™
The Raynor EnduraCote hardware system comes with springs, tracks, and hardware that are powder coated to provide a clean, finished look and maximum protection against rust.
IECC REQUIREMENTS PACKAGE/CALIFORNIA TITLE 24
The International Energy Conservation Code (IECC) requires building components to meet minimum Air Infiltration rates. This option will ensure the AV300 and AV200 will exceed the latest IECC and Title 24 standards for air infiltration (only), by using the required header and jamb seals and track mounting. Exhaust ports and pass doors cannot be used.
CARBON MONOXIDE VENT
Allows you to channel fumes to the outside when the door is closed. Available in a variety of sizes.
HIGH-CYCLE COUNTERBALANCE SYSTEM
For reliable operation in high traffic areas, choose high-cycle torsion springs with 25,000, 50,000, or 100,000-cycle life. For reduced maintenance and ultra-smooth operation in heavy-use applications, choose a weight counterbalance system.
ALUMINUM PANELS
For busy work environments and to prevent glass breakage, aluminum panels protect your investment. Choose from insulated panels, kick panels, and impact-rated panels as well.
LOCKS
In applications where control and access are important, choose from a variety of locking options to help keep your building secure. Locks come in both inside and outside variations.
HEADER SEAL
A flexible vinyl flap header seal reduces air infiltration and energy costs by sealing the top of the AlumaView AV300 door against the header.
RUGGED HARDWARE AND SPRINGS
The AlumaView AV300 door comes packaged with the right combination of hardware, track, and springs to match your door’s size and application.
SNAP-IN RETAINER
AlumaView AV300 panels and glass are sealed and held in place with a snap-in retainer. Clear anodized, RAL9003, RAL 9016 and standard white doors use gray snap-ins. All other doors use black snap-ins.
CHOICE OF WINDOWS
For maximum design flexibility, choose from tempered, tinted, double-strength, insulated, acrylic, polycarbonate, or impact-resistant glass in a variety of thicknesses.
ANODIZED FINISHES
Choose from six custom anodize finishes including champagne, light bronze, medium bronze, dark bronze, extra dark bronze, or black.
ELEGANT FINISH WOODTONES™
Aluminum coated with durable and long-lasting material that delivers a high definition wood grain look.
SLEEKSIGHTLINE™
AlumaView AV200 and AV300 models offer a sleek 1-pane or trendy 2-pane glass layout. These new glass layouts are available now and vary depending on glass type and door size.
INFORMATION
APPLICATIONS
- Large opening
- Showrooms
- Automotive
- Retail
- Restaurant
TECHNICAL INFORMATION-PANEL SOLUTIONS
| DOOR WIDTH | NUMBER OF PANELS |
|---|---|
| Up to 9’2″ | 2 |
| 9′ 3″ – 12′ 2″ | 3 |
| 12′ 3″ – 16′ 2″ | 4 |
| 16′ 3″ – 20′ 2″ | 5 |
| 20′ 3″ – 24′ 2″ | 6 |
BRAND
Raynor
PRODUCT TYPE
Garage Door
GUARANTEE
Limited Warranty: Sections: 5-Years, hardware: 1-Year, springs: 1-Year
BENEFITS
- Durable
- Rugged hardware and springs
- Reduced energy costs
CHARACTERISTICS
- Durable
- Energy-saving
- Optional pedestrian door
- Lockable
- Choice of finishes
TECHNICAL INFORMATION-SECTION SOLUTIONS
| DOOR WIDTH | NUMBER OF SECTIONS |
|---|---|
| Up to 8’2″ | 4 |
| 8′ 3″ – 10′ 6″ | 5 |
| 10′ 7″ – 12′ 6″ | 6 |
| 12′ 7″ – 14′ 6″ | 7 |
| 14′ 7″ – 16′ 6″ | 8 |
DOOR
- Model : AlumaView AV300
- Size : 24′ x 24′ Max
- Operation : Manual, Motor or Hand Chain
- IECC Thermal Performance : Tested Air Infiltration @ 25 mph 0.21 cfm/ft2, Tested U-Factor 0.83 (w/ 1″ thick, insulated, Low E glass)
TRACK
-Size : 2″ or 3″
-Gauge : 13 and 16-Gauge
-Finish : Galvanized or Optional White Powder Coat
-Type : Normal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour, and QuikClip™ Pre-Assembled Track Options
COUNTERBALANCE SYSTEM
-Type : Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counterbalance
-Shafts : Tube or Solid (D-Shaft, 1″ Keyed, 1-1/4″ Keyed)
-Springs : Spring Inner Diameter: Spring Inner Diameter: 2-1/4″, 3-1/2″ or 5-1/2″; Duplex or High Cycle (30K, 50K, 100K); Optional Black Powder Coat
HARDWARE/ACCESSORIES
-Hinges : 11, 13, 14-Gauge or Hybrid
-Rollers : Standard (2″ or 3″) or Heavy Duty (2″ or 3″)
-Finish : Galvanized or Optional White Powder Coat
-Lock : Interior Slide Lock or Exterior Lock Bars
-Seal(s) : Jamb Seal
-Pedestrian Door : 32″ Wide x 3 Sections High
-Optional Wind Loading : Certified Wind Load Available
-Hanger Angle : 11, 13-Gauge Galvanized or 13-Gauge White Powder Coated
SECTIONS
-Material : Aluminum
-Surface Texture : Smooth
-Section Thickness : 3″
-Gauge : N/A
-Section Joint : Tongue & Groove
-Rail & Stile Insulation : ThermaXP
-Stiles : Extruded alum(mini .05″)
-Insulation : 3/8″ Expanded Polystyrene (in panels only)
-Construction : Rail & Stile – minimum .063″; 5/16″ diameter screws
-Panel Configuration : .50″ thick Aluminum panels
-Seals : Bottom Seal (3″, 4″ Gray; 3″ Yellow; or 3″ Black EPDM), Optional Header Seal. Optional IECC and California Title 24 air filtration compliant package available.
-Trussing : Wind Load: 20 P.S.F. Tested/13.3 P.S.F. Design Load (standard); Material: U-bar (18-Gauge or 20-Gauge);Sizes: 4″, 6″, or 8″
-Color : Clear and Optional Anodized Finishes, ArmorBrite Powder Coat System, or Elegant Finish Woodtones
-Windows : 1/8″ DSB Glass; 1/8″ 1/4″ 3/16″ Clear Tempered Glass; 1/8″ 1/4″ Tinted or Tinted Tempered Glass; 3/16″ 1/4″ Clear Glass; 1/4″ Clear Laminated Glass; 1/4″ Clear Wire Glass; 1/2″ Insulated DSB Glass; 1” glass available in Insulated Clear, Insulated Clear Tempered, Insulated Low E Annealed, Insulated Low E Tempered, Insulated Satin Tempered, and Special Glass Available for Order (Please Note: 1” Insulated Glass is Made up of Two Panes of 1/8” Glass with a ¾” air space.)
SPECS/DRAWINGS
STANDARD DRAWINGS - 2-INCH TRACK/BRACKET-MOUNTED
| SHEETS | DRAWINGS | |
|---|---|---|
| Normal Headroom | DWG Drawing | |
| Lift Clearance | DWG Drawing | |
| Vertical Lift | DWG Drawing | |
| Low Headroom Front-Mount | DWG Drawing | |
| Low Headroom Rear-Mount | DWG Drawing |
STANDARD DRAWINGS - 2-INCH TRACK/ANGLE-MOUNTED
| SHEETS | DRAWINGS | |
|---|---|---|
| Normal Headroom | DWG Drawing | |
| Lift Clearance | DWG Drawing | |
| Vertical Lift | DWG Drawing | |
| Low Headroom Front-Mount | DWG Drawing | |
| Low Headroom Rear-Mount | DWG Drawing |
STANDARD DRWAINGS - 3-INCH TRACK/ANGLE-MOUNTED
| SHEETS | DRAWINGS | |
|---|---|---|
| Normal Headroom | DWG Drawing | |
| Lift Clearance | DWG Drawing | |
| Vertical Lift | DWG Drawing | |
| Low Headroom Front-Mount | DWG Drawing | |
| Low Headroom Rear-Mount | DWG Drawing |
COLORS
ELEGANT FINISH WOODTONES™ OPTIONS
-Aged Dark Oak -American Douglas -American Maple -Cherry -Cherry Flame -Colony Maple -Dark Walnut -European Cherry -Golden Oak -Knotty Pine -National Walnut -Oak -Oregon Douglas -Table Cherry -Teak
ANODIZED FINISH OPTIONS
-Clear -Champagne -Light Bronze -Medium Bronze -Dark Bronze -Extra Dark Bronze -Black
ARMORBRITE™ POWDER COAT SYSTEM
Custom Colors: ArmorBrite: 188 custom powder coated colors available.
