Raynor AlumaView® AV175 Garage Door
ALUMAVIEW® AV175 GARAGE DOOR
ALUMAVIEW® AV175 GARAGE DOOR
Aluminum Sectional Rail and Stile Doors
This benchmark commercial door provides Raynor reliability and durability to meet, or exceed, the requirements of daily use.
With 1-3/4″ thick door sections and streamlined rail construction, the Raynor AlumaView AV175 aluminum sectional rail and stile doors are engineered for lasting beauty and durability.
FEATURES
AV175 FEATURES AND OPTIONS
Raynor AlumaView AV175 aluminum sectional rail and stile doors are available with numerous features and options, including those listed below.
YEARS OF DURABILITY
AV175 door sections are clear-anodized for maximum durability and are designed to withstand minimum wind loads of 15 p.s.f.
DECREASED ENERGY COSTS
AlumaView doors help you reduce energy costs with a U-shaped, vinyl bottom weatherseal secured by a sturdy aluminum retainer.
CUSTOMIZED TRACK*
Track systems are supplied to fit special clearances, inclines, or contour applications. Hardware and track systems can be customized to fit any need. Additional trussing is available for special wind loading applications. A QuikClip™ pre-assembled track option is also available.
*Some options may be limited to door size or model.
JAMB SEAL
EPDM rubber jamb seal also helps to reduce air infiltration and decrease energy costs by sealing the side of the door when closed.
ENDURACOTE™
The Raynor EnduraCote hardware system comes with springs, tracks, and hardware that are powder coated to provide a clean, finished look and maximum protection against rust.
ALUMINUM PANELS
For busy work environments and to prevent glass breakage, aluminum panels protect your investment. Choose from impact-resistant and insulated panels as well.
LOCKS
In applications where control and access are important, choose from a variety of locking options to help keep your building secure. Locks come in both inside and outside variations.
HEADER SEAL
A flexible vinyl flap header seal reduces air infiltration and energy costs by sealing the top of the AV175 door against the header.
RUGGED HARDWARE AND SPRINGS
The AlumaView AV175 door comes packaged with the right combination of hardware, track, and springs to match your door’s size and application.
SNAP-IN RETAINER
AlumaView AV175 door panels and glass are sealed and held in place with a snap-in retainer. Clear anodized, RAL9003, RAL 9016 and standard white doors use gray snap-ins. All other doors use black snap-ins.
HIGH-CYCLE COUNTERBALANCE SYSTEM
For reliable operation in high-traffic areas, choose high-cycle torsion springs with 25,000, 50,000, or 100,000-cycle life. For reduced maintenance and ultra-smooth operation in heavy-use applications, choose a weight counterbalance system.
CHOICE OF WINDOWS
For maximum design flexibility, choose from tempered, tinted, double-strength, insulated, acrylic, polycarbonate, or impact-resistant glass in a variety of thicknesses.
ANODIZED FINISHES
Choose from six custom anodize finishes including champagne, light bronze, medium bronze, dark bronze, extra dark bronze, or black.
ELEGANT FINISH WOODTONES™
Aluminum coated with durable and long-lasting material that delivers a high definition wood grain look.
CARBON MONOXIDE VENT
Allows you to channel fumes to the outside when the AlumaView AV175 door is closed. Available in a variety of sizes.
INFORMATION
CHARACTERISTICS
- Durable
- Energy-saving
- Optional pedestrian door
- Lockable
- Choice of finishes
TECHNICAL INFORMATION-SECTION SOLUTIONS
| DOOR WIDTH | NUMBER OF SECTIONS |
|---|---|
| Up to 8′ 6″ | 4 |
| 8′ 7″ – 10′ 6″ | 5 |
| 10′ 7″ – 12′ 6″ | 6 |
| 12′ 7″ – 14′ 2″ | 7 |
BRAND
Raynor
PRODUCT TYPE
Garage Door
GUARANTEE
Limited Warranty: Sections: 5-Years, hardware: 1-Year, springs: 1-Year
BENEFITS
- Durable
- Rugged hardware and springs
- Reduced energy costs
DOOR
-Type : Commercial Sectional Garage Doors
-Model : AlumaView AV175
-Size : 16′ x 14′ Max
-Operation : Manual, Motor or Hand Chain
TECHNICAL INFORMATION-PANEL SOLUTIONS
| DOOR WIDTH | NUMBER OF PANELS |
|---|---|
| Up to 8′ 6″ | 2 |
| 8′ 7″ – 11′ 11″ | 3 |
| 12′ 0″ – 14′ 2″ | 4 |
APPLICATIONS
- Large opening
- Showrooms
- Automotive
- Retail
- Restaurant
COUNTERBALANCE SYSTEM
-Shafts : Tube (13-Gauge) or Solid (D-Shaft, 1″ Keyed)
-Type : Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counterbalance
-Springs : Spring Inner Diameter: 2-1/4″, 3-1/2″ or 5-1/2″; Duplex or High Cycle (30K, 50K, 100K); Optional Black Powder Coat
TRACK
-Size : 2″ or 3″
-Gauge : 13 and 16-Gauge
-Finish : Galvanized or Optional White Powder Coat
-Type : Normal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour, and QuikClip™ Pre-Assembled Track Options
HARDWARE/ACCESSORIES
- Hinges : 11, 13, 14-Gauge or Hybrid
- Rollers : Standard (2″ or 3″) or Heavy Duty (2″ or 3″)
- Finish : Galvanized or Optional White Powder Coat
- Lock : Interior Slide Lock or Exterior Lock Bars
- Seal(s) : Jamb Seal
- Hanger Angle : 11, 13-Gauge Galvanized or 13-Gauge White Powder Coated
SECTIONS
-Material : Aluminum
-Surface Texture : Smooth
-Section Joint : Ship Lap
-Section Thickness : 1-3/4″
-Gauge : N/A
-Panel Configuration : NA
-Stiles : Extruded aluminum(mini .05″)
-Insulation : 3/8″ Expanded Polystyrene (in panels only)
-Construction : Rail & Stile – minimum .05″, 5/16″ diameter screws
-Seals : Bottom Seal (3″, 4″ Gray; 3″ Yellow; or 3″ Black EPDM), Optional EPDM Header Seal
-Trussing : Material: Optional U-bar (18-Gauge or 20-Gauge – can have up to 1 U-bar per door)
-Color ; Clear and Optional Anodized Finishes, ArmorBrite Powder Coat System, or Elegant Finish Woodtones
-Windows : 1/8″ DSB Glass; 1/8″ 1/4″ 3/16″ Clear Tempered Glass; 1/8″ 1/4″ Tinted or Tinted Tempered Glass; 3/16″ 1/4″ Clear Glass; 1/4″ Clear Laminated Glass; 1/4″ Clear Wire Glass; 1/2″ Insulated DSB Glass
SPECS/DRAWINGS
STANDARD DRAWINGS - 2-INCH TRACK/BRACKET-MOUNTED
| SHEETS | DRAWINGS | PDF |
|---|---|---|
| Normal Headroom | DWG Drawing | |
| Lift Clearance | DWG Drawing | |
| Vertical Lift | DWG Drawing | |
| Low Headroom Front-Mount | DWG Drawing | |
| Low Headroom Rear-Mount | DWG Drawing |
STANDARD DRAWINGS - 2-INCH TRACK/ANGLE-MOUNTED
| SHEETS | DRAWINGS | |
|---|---|---|
| Normal Headroom | DWG Drawing | |
| Lift Clearance | DWG Drawing | |
| Vertical Lift | DWG Drawing | |
| Low Headroom Front-Mount | DWG Drawing | |
| Low Headroom Rear-Mount | DWG Drawing |
STANDARD DRWAINGS - 3-INCH TRACK/ANGLE-MOUNTED
| SHEETS | DRAWINGS | |
|---|---|---|
| Normal Headroom | DWG Drawing | |
| Lift Clearance | DWG Drawing | |
| Vertical Lift | DWG Drawing | |
| Low Headroom Front-Mount | DWG Drawing | |
| Low Headroom Rear-Mount | DWG Drawing |
COLORS
ELEGANT FINISH WOODTONES™ OPTIONS
-Aged Dark Oak -American Douglas -American Maple -Cherry -Cherry Flame -Colony Maple -Dark Walnut -European Cherry -Golden Oak -Knotty Pine -National Walnut -Oak -Oregon Douglas -Table Cherry -Teak
ANODIZED FINISH OPTIONS
-Clear -Champagne -Light Bronze -Medium Bronze -Dark Bronze -Extra Dark Bronze -Black
ARMORBRITE™ POWDER COAT SYSTEM
Custom Colors: ArmorBrite: 188 custom powder coated colors available.
