Rieder Group Concrete Panels - öko skin stripes
CONCRETE PANELS - ÖKO SKIN STRIPES
ÖKO SKIN STRIPES
The new öko skin stripes with three different widths enable architects numerous possibilities in slatted design. They are available in a length of 2500 or 3100 mm and a width of 70, 147 and 302 mm. The sequencing of the slats is pre-defined.
They are available in a length of 2500 or 3100 mm and a width of 70, 147 and 302 mm. The sequencing of the slats is pre-defined.
The newly developed invisible fastening system hidden fix for öko skin facade slats enables quick and easy installation.
With the concealed attachment, the öko skin slats are even more effective, since the overall appearance is not marred by rivets or screws. Rieder supplies all fastening components as well as the öko skin slats.
These are delivered to the site already pre-drilled, whereby the installation effort is reduced. Rieder provides a calculation tool to calculate the exact number of required components.
INFORMATION
SURFACES
- Mix of ferro light + ferro
- Mix of matt + ferro light + ferro (extra contrast)
WIDTH
70 mm, 147 mm and 302 mm / 2.76“, 5.79” and 11.89“ (US) sequencing of slats is pre-defined
LENGTH
2500 mm, 3100 mm /98.42“, 122“ (US)
USE
Large and small scale facades and roofs
TEXTURE
Standard
THICKNESS
13 mm /0.5“ (US)
CERTIFICATION
ISO 9001 & ISO 14001 certifications / A1 “non-combustible” as per DIN 4102.
APPLICATIONS
Educational, Residential, Hotel, Culture and corporate applications
COLOR COLLECTION
Greyscale, Pietra, Timber, BrickyGreyscale (7) / 3 surfaces: ferro (sandblasted), ferro light (finely sandblasted) and matt (brushed)
FORMAT
Slats
VISIBLE: RIVET, SCREW
Distance to slat edge at least 30 mm / 1.18“ (US
CONCEALED
Distance to slat edge (vertically) at least 100 mm /3.93“ (US)
MOUNTING
Manually or with vacuum suction; slats must be handled with special care
SIZES
Width from: 70,147,302 mm and length from: 2500, 3100 mm.
ADHESIVE, UNDERCUT ANCHOR (ON REQUEST)
Distance to slat edge (horizontally): with 70 mm and 147 mm / 2.76“ and 5.79“ (US) once in the middle; with
302 mm / 11.89“ (US) minimum distance to slat edge 60 mm / 2.36“ (US) (with point attachment: 2 pieces)
Maximum distance between two vertical attachment points: 600 mm / 23.62“ (US)
Additional supporting structure or bracing required depending on statics
PALLETISATION
Mix of colours, surfaces and the sequencing used for the three slat-widths is pre-defined on the pallet.
8 slats per layer (4 x 70 mm, 2 x 147 mm, 2 x 302 mm / 4 x 2,76“, 2 x 5.79” and 2 x 11.89“ (US)) in colour and
surface mix (according to visualisation*). Modular pre-assembly on request.
16 layers per pallet (47 m² / 505.90 ft² (US) of 2500 mm length | 58 m² / 624.31 ft² (US) of 3100 mm length.