Saniflo Sanifos 1000+ Pump Station
SANIFOS 1000+ PUMP STATION
SANIFOS 1000+ PUMP STATION
The Sanifos 1000+ pre-packaged pump station includes pump, floats, alarm and control panel.
Wastewater is run from your building to this remote tank and is then automatically pumped to the main sewerage line according to pre-set float levels.
The Sanifos 1000+ will cope with all combined waste water from your building.
A CHOICE OF 2 PUMPS
- Sanipump GR Cutter pump for wastewater
- Sanipump ZFS 71.1 pump for wastewater where high lift is required
- Single or Twin Pump options
The tank comes with pre-assembled pump, isolation valve, non-return valve, associated internal pipework three floats and alarm and strobe to signal high level events.
The SANIFOS 1000+ has been designed for use externally, it can be buried near the property to pump wastewater or storm water up to gravity services. Single and Twin pump options.
Information
IP RATING
IP68
VOLTAGE
220-240V/50Hz
MOTOR POWER
2200 W
TANK VOLUME
1000 L
APPLICATIONS
- Commercial
- Residential
- Exterior
- Bathroom
- Kitchen
- Laundry
DOWNLOADS
↓ Information Sheet
↓ Installation Instructions
↓ Inground Tank Ballast Instructions Sanifos 1000+
↓ Product Sheet - Sanifos 1000 ZFS Single
↓ Product Sheet -Sanifos 1000 ZFS Twin
↓ Product Sheet - Sanifos 1000 GR Twin
↓ Case Study
INLET PIPEWORK
100 mm
MAXIMUM FLOW RATE
17 m³ / h
GUARANTEE
2 year warranty
USE
In-ground pump
DISCHARGE PIPE DIAMETER
DN50 (Ø ext. 50 mm)
MAX. TEMPERATURE OF THE PUMPED LIQUID (5 MIN)
55°C Max (intermittent)
CHARACTERISTICS
- Varied sizes
- Underground installation
PERFORMANCE CHART
VIDEOS