Leebo 1000g Asphalt Pavers Machine
1000G ASPHALT PAVERS MACHINE
1000G ASPHALT PAVERS MACHINE
Small footprint, large results. The gravity-feed tilt hopper featured on the 1000g can be raised. To a steeper level than any other paver in its class allowing for optimum material flow.
This paver boasts of a sleek design in which the hopper wings can be retracted. This dynamic feature allows continuous material flow while reducing the machine’s overall width.
As on all LeeBoy pavers, this smaller track paver features our superior Legend Screed system that is proven to supply one of the best mats in the industry.
INFORMATION
OPERATOR’S CONTROLS
All control levers are on the left side, right side levers include left and right drive control, right auger, right screed extension and hopper, color graphic control screen with digital readouts. Review and monitor system vitals including: oil pressure, hour meter, fuel gauge, volt meter, water temp, tachometer, hydraulic oil temp, engine diagnostics.
DOWNLOADS
↓ Brochure
↓ Specification Sheet
↓ Manual
↓ Line Card
TRACK DRIVE SYSTEM
- Hydrostatically powered, self-cleaning friction drive tracks
- Track size: 14” wide x 4’ long steel (wheel base)
- Paving speed: 0 to 220’ per minute (2.5 mph)
- Travel speed: 0 to 220’ per minute (2.5 mph)
OPTIONAL EQUIPMENT
-Two-speed track drive (track only) -Fail-safe brake
-Rubber tire drive system -Sonic auger, sensors and cords -Slope meter -LED work light package -Hose reel, limited to one -Electric screws for grade controls -Wiring only, grade controls (TopCon), includes A/M modules -Sonic grade control, one side (TopCon)
PERFORMANCE FEATURES
-49 hp (37kw) Kubota Tier 4 Final Diesel Engine -Paving Widths Variable Up To 13’ -Low Deck Configuration -Best-In-Class Tilt Hopper Angle -Single Lever Hopper and Wing Control -Ultra-efficient Material Management System -Under Auger Material Cut-Off Gates -5.5 Ton Capacity Material Hopper -Steel Track for Superior Flotation -Proven Legend Screed System -Heated and Vibrating Screed System
STEERING
Independent hydrostatic steering from left or right side of machine
WASHDOWN SYSTEM
Electric HD pump with two hoses and spray nozzles
OPERATOR’S PLATFORM
Full machine width platform, left side sea
ENGINE
Kubota Turbocharged Diesel, Tier 4 Final – 49 hp (37kw)
CAPACITIES
- Fuel : 13.5 Gallons
- Hydraulic : 45 Gallons
- Washdown Tank : 7 Gallons
DIMENSIONS
- Height : 7’ Inches
- Width : 8’6” Inches
- Length : 9’6” Inches
- Weight : 11,000 lbs
PUSH ROLLERS
Two rollers with sealed bearings
HOPPER HOPPER SIZE
5.5 ton
MATERIAL HANDLING
- Two independent hydraulically operated under auger material cut-off gates
- Two independent hydraulically operated cast augers
PAVING DIMENSIONS
- Width : Variable Up To 13’ Inch
- Depth : Depth: 0” to 6”
SCREED
-Legend Propane full free floating screed -Consisting of a main screed and two hydraulically operated screed extensions -Equipped with a electric vibrator
SCREED HEAT
-Two propane burners on main screed -One propane burner on each extension
SCREED CROWN/VALLEY
-Equipped with a crown/valley adjustment -Includes a depth indicator for the operator
ADDITIONAL STANDARD
- Back-up alarm Equipment
- LED beacon light
- Horn
- Lockable fuel & hydraulic caps
- Electric gauge package (oil pressure, voltmeter, fuel)
- Wired for sonic auger, sensory and cord
GALLERY
