lincrusta Seville Dado Wall Panels
SEVILLE DADO WALL PANELS
SEVILLE DADO WALL PANELS
There is an obvious spanish influence to the seville design, which has an almost lace-like quality to it.
Dramatic and detailed, it also mirrors the embossed leather that was popular in spain in the 1800s.
INFORMATION
TYPE
Wall Panel
PRODUCT FAMILY
Seville Dado
PRODUCTION
Made in England
DESIGN MATCH
Not Applicable
QUALITY
Lace-like quality
CORNERS
- Internal Corners
- External Corners
ROLL LENGTH
- 9.14 m
- 10 yards
ROLL WIDTH
- 560 mm
- 22 inches
DESIGN REPEAT
- 914 mm
- 36 inches
FIRE RATING
- BS EN15102:2007+A1:2011
- Class B, ASTM-E84
- Class 1/A
LEATHER
Embossed Leather
CORNER ANGLE
45° Angle
SURFACE PREPARATION
-Thorough preparation of the surface is essential when installing Lincrusta. Remove old paper, wash down, fill all imperfections and allow to dry. -For POROUS surfaces, rub down before applying a coat of size (diluted regular wallpaper adhesive). - For NON-POROUS surfaces (eg. solvent painted walls), cross-line to give perfect adhesion. Apply lining paper using a ready-mixed adhesive containing a fungicide. -Ensure surface is dry before installing Lincrusta.
RECOMMENDED ADHESIVE
Lincrusta Adhesive has been formulated specifically for the installation of Lincrusta. We DO NOT recommend using any other adhesives. If the Lincrusta Adhesive is a little thick, stir well – do not dilute.
STORING & HANDLING LINCRUSTA
Store Lincrusta at room temperature before installation. When handling, care should be taken to avoid surface damage. Lincrusta becomes more pliable after soaking and pasting. Lincrusta is made from materials that once mixed, start a natural curing process. If stored correctly at an ambient temperature, Lincrusta has a shelf life of 18 months to 2 years from the production date. Please make sure that you bear this in mind when planning your project and only purchase Lincrusta when it is required
EQUIPMENT
- Sharp Knife
- Tape Measure
- Spirit Level
- Felt Smoothing Roller
- Straight Edge (for cutting)
- Sponge
- Cutting Board– 50-75mm (2-3”) Synthetic Bristle Paint
Brush or Roller