Hunter Pgp Ultra
PGP ULTRA
PGP ULTRA
The PGP Ultra raises the bar for rotor technology with powerful features developed over three decades of research, customer feedback, and lab testing.
The PGP Ultra takes the foundation of the best-selling PGP Rotor and raises the bar with a variety of new features developed over three decades of research, customer feedback, and lab testing. Among the most notable improvements of the PGP Ultra is its non-strippable drive and automatic arc return.
These two features work to allow the turret to be turned without causing damage, and return the turret to its original arc regardless of where it is turned. Other advanced features include 34 nozzle options with several radius choices, and a headed slot and set screw.
FEATURES
AUTOMATIC ARC RETURN
This patented feature returns the turret to the original arc regardless of where it is turned. This ensures vandal protection in any environment.
NON-STRIPPABLE DRIVE
The patented, non-strippable, vandal proof drive mechanism enables the turret to be turned without causing damage.
PART- AND FULL-CIRCLE IN ONE MODEL
Patented non-reversing 360 for part- and full-circle in one model, from 50 to 360 degrees.
HEADED AND SLOTTED SET SCREW
Use a slotted screwdriver or the Hunter wrench for easier and simpler adjustments as needed.
OPTIONAL RECLAIMED WATER ID
Purple caps indicate where non-potable irrigation water is being used.
DRAIN CHECK VALVE (UP TO 10 FT. OF ELEVATION)
The drain check valve keeps lines from draining when the system is shut off. This saves water, reduces liability, and increases system life.
INFORMATION
BENEFITS
- Patented automatic arc return feature returns the turret back to the original arc pattern if vandalized; adjustable arc from 50° to 360°- Non-strippable drive mechanism is protected from damage if turned in the opposite direction of travel- Part- and full-circle in one model for flexibility across landscapes and reduced inventory- Headed and slotted setscrew allows radius adjustment with a Hunter wrench or flat-blade screwdriver- Flat-top nozzles allow fast, easy insertion- QuickCheck™ arc mechanism for fast arc adjustment
RADIUS
17’ to 47’
FLOW
0.36 to 14.8 GPM
INTEL SIZE
3/4'' NPT
OPERATING SPECIFICATIONS
- Nozzle choices: 34
- Radius: 17' to 47'
- Flow: 0.36 to 14.8 GPM
- Recommended pressure range: 25 to 70 PSI
- Operating pressure range: 20 to 100 PSI
- Precipitation rate: 0.4 in/hr approximately
- Nozzle trajectory: standard = 25°, low-angle = 13°
- Nozzle racks: 1.5 to 8.0 blue, 2.0 to 4.5 low-angle gray, 0.50 to 3.0 black, 6.0 to 13.0 green, MPR-25, MPR-30, MPR-35
- Warranty period: 5 years
FACTORY-INSTALLED OPTIONS
- Drain check valve (up to 10' of elevation)
- Reclaimed water ID
- Blue #1.5–4.0 nozzles
USER-INSTALLED OPTIONS
- Drain check valve (up to 3' of elevation) PGP-04 only (P/N 142300SP)
- HSJ-0 prefabricated ¾" PVC swing joint
PGP-00
- Overall Height: 7½"
PGP-04
- Pop-up Height: 4"
PGP-12
- Pop-up Height: 12"
