Isolgomma Megasafe 50 R /v/g 05
MEGASAFE 50 R /V/G 05
MEGASAFE 50 R /V/G 05
Safety flooring for playgrounds, recreational areas and walkways 50 mm thickness
Rubber pads made of SBR ( Styrene Butadiene ) rubber granules compounded with polyurethane binder designed for playgrounds flooring, recreation areas and walkways .
The pads are equipped with the holes to be used with plastic connector for the pads dry application. The upper surface is smooth and anti-slip, while the bottom surface is shaped to get high protection on impact falls.
INFORMATION
TYPE
Safety flooring
THICKNESS
50 mm
NOTES
HIC 1,62
SUPERFICIAL WEIGHT (KG/M²)
27,70
INSTALLATION
- Dry
- Glue
RUBBER PADS
Styrene Butadiene
DOWNLOAD
SIZE
The pads are available in the size of 500 mm or 1000 mm side with the thickness of 50 mm, with 1,62 m of HIC.
APPLICATION FIELDS
- Playgrounds
- Recreation and relax areas
MAIN STRENGHTS
- High HIC/thickness ratio – EN 1177
- Easy installation and maintenance, non-toxic
- Long time durability
PACKING AND STORING
Each pallet is wrapped and protected with waterproof polythene film. Inside storage is recommended to protected from rainfall
CONDITIONS
Make sure all the pads have the same temperature during the entire installation period. Lay down the pads 24 hours before the installation to allow them to get their original dimensions. Install all the pads in a single laying session in order to guarantee installation under similar conditions.
INFLUENCE FROM ATMOSPHERIC CONDITIONS
In order to get the idea application enviromental conditions the temperature of the application site place have to be above 4°C for at least 24 hours before the pads application. If the site application has temperature below to 4°C, please keep the pads stored for at leat 72 hours befor the installation at a temperature above 10°C. Do not install the pads on sites where the temperature is below at 4°C for long time.The pads have to be stored and installed on shadow in order to avoid pads overheating.
