Italporphyry Raised In Porphyry Stone Stairs
RAISED IN PORPHYRY STONE STAIRS
RAISED IN PORPHYRY STONE STAIRS
In the construction of the stone stairs, the risers are used to cover the vertical part of the step. They are obtained from thin "saw plates", ranging from 1cm to 3cm, and sawn sides. The risers in Trentino porphyry can be supplied with.
INFORMATION
USEFUL THICKNESSES FOR LAYING (MM)
It is necessary to consider the space / size greater than 25 mm to which the bedding material is added
INTENDED USE POSSIBLE
- Stair coverings (internal / external)
- External stair coverings
APPLICATION
- Natural Top With Sawn Edges, Fixed Or Running Length, Heads, If Seen, Can Be Calibrated And Worked.
- Flamed Top Previously Sawn Like The Ribs, With A Thickness Usually Required From Cm. 2
- Polished Top Previously Sawn Then Polished
- Sandblasted Surface: Surface Previously Sawn Then Sandblasted
SURFACE
The processes other than the natural surface can also be supplied for indoor stairs. They are in fact worked in such a way as to be comfortable for daily walking inside.
THICKNESS (MM)
- 10 to 25
- fixed 20
COMMERCIAL NAME
Porphyry from Trentino
PROCESSING AND FINISHED FEATURES
- In the case of risers with visible edges, lateral shimming and processing are necessary
- In the case of risers with visible edges, it is necessary to work them
COLORS
Red, gray, violet red and rust or blends
PROCESSING
Porphyry risers obtained from layered material with natural
surface , variable thicknesses, sawn edges 2) porphyry risers obtained by sawing from block, with subsequent surface treatment
DIMENSIONS (MM)
Height> 60
