Gantois Mila Sheet
MILA SHEET
MILA SHEET
Decoration Sheet
Layout, profile lines and perforation shape of perforation, patterns and effects are created with light and shadow vertically and horizontally.
You can specify level of transparency to vary the level of light that can be seen both from the outside inwards and vice versa.
INFORMATION
PATTERN
THICKNESS
Depending on the material, the sheet can have as a thickness between 1.5 and 3 mm.
DOWNLOAD
DIMENSIONS
The available standard sizes are (in mm) : - 1000 x 1000 - 2000 x 1000 - 2500 x 1250 - 3000 x 1500
From basis of these layouts, you can chose your cut size. If you require continuity of pattern in either length or width direction, the peramiters in the technical data sheet need to be observed. In the case of the use of balustrades, the length of the sheet must not exceed 1350mm maximum between fixings. In the case of a facades, please contact us so that we develop the layout for you.
FINISHED LAYOUT OF YOUR PRODUCT
Would you like to customize your sheet dimensions and specific borders ? Tell us your required dimensions (in mm) on the layout drawing below
Note: the length and width must not exceed the pre-selected figures !
20mm borders are indicative minimum !
MATERIAL
– Steel
– Aluminium
– Cold rolled steel
– Steel Galvanised Before Cutting
PAINT
1 face : 30 € (m²) - 2 faces : 40 € (m²)
TECHNICAL CHARACTERISTICS
% Open Area : 58
TYPE OF PERFORATION
– The Rythmic range
– The Illusion range
