Unilin Panels Durelis
DURELIS
DURELIS
Moisture-resistant and structural construction board for flooring or wall racking. Moisture resistant and structural P5 chipboard.
Durelis is suitable for use in humid conditions, service class 2, mainly as racking board in walls or as structural flooring board.
Durelis is made from 100% recovered wood: up to 90% post-consumer wood, supplemented by 10% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management dustry, sustainable forestry or verge management.
INFORMATION
CE NORM
P5
MATERIAL
100% recovered wood
DENSITY
Standard
CONDITIONS
Humid conditions - service class 2
FORMALDEHYDE CLASS
Standard
FIRE REACTION CLASSES
- D-s2-d0
- E
APPLICATIONS
- Exterior wall element
- Racking board
DETAIL
- Chipboard
- Moisture resistant
CHARACTERISTICS
- Product class P5
- Structural Applications
- Moisture-resistant
- TopFinish or sanded
- Tongue-and-groove joints (optional)
DOWNLOAD
↓ Datasheet
↓ Specification
↓ Declaration of performance
↓ Installation manual
↓ Brochure
↓ Stocklist
APPLICATIONS
Durelis can be used in both traditional housing construction and timber construction as a structural construction board for floors, roofs or walls. This board is also useful for non-load bearing applications, such as interior fittings in zones with a high atmospheric humidity. Furthermore, it works perfectly as single use or re-usable concrete formwork with a TopFinish surface. Consult the UNILIN construction manual with detailed instructions for use and characteristic metrics at www.unilinpanels.com.
MOISTURE-RESISTANT, MULTIFUNCTIONAL CONSTRUCTION BOARD
Durelis is an MUF-glued, versatile, moisture-resistant chipboard suitable for load-bearing applications. As an excellent alternative to traditional OSB/3 boards, Durelis is suitable for applications in environments with a high atmospheric humidity level. Durelis’ unique composition ensures that swelling and linear expansion remain limited. These construction boards can be used in service class 2 (limited temperature and atmospheric humidity) and can only be used in biological hazard classes 1 and 2 of EN Standard 335-3.
FINISH
Durelis is available with a sanded surface or a TopFinish surface. The heat-treated TopFinish surface (TF) creates an extra-hard, sealed surface with greater impact resistance, and it is easy to clean. The increased concentration of natural paraffin in the surface increases its moisture resistance. Our boards with a TopFinish surface also score highly for air tightness. These advantages mean that boards with a TopFinish surface are particularly suitable for building applications.
A fine, sanded surface (SA) is recommended if the Durelis board is going to receive an additional finish of melamine, finishing foil, lacquer, veneer or laminate, as is often the case in interior applications. Durelis is available as standard with straight edges, but can also be finished with a tongue-and-groove system (TG). The toothed profile ensures high stability and simple installation. The system makes it possible to nail or screw the panels blind
