Glidden High Endurance® Plus Exterior Paint + Primer
GLIDDEN® HIGH ENDURANCE® PLUS EXTERIOR PAINT + PRIMER
GLIDDEN® HIGH ENDURANCE® PLUS EXTERIOR PAINT + PRIMER
Glidden® High Endurance® Plus Exterior Paint + Primer is a high quality, exterior paint and primer in one, offered at an exceptional price. This exterior paint is deal for many exterior projects includingproperly prepared, exterior wood, brick, masonry, concrete, weathered aluminum, weathered vinyl siding*, and primed metal substrates.
This 100% acrylic paint provides excellent hide and adhesion, and strong resistance to fading, cracking & peeling. *Vinyl siding and similar plastic composites should not be painted with a color darker than the original color. Painting vinyl siding or plastic composites with a darker color may cause them to warp.
BENEFITS
APPLICATION DOWN TO 35°F
Do your project when you want to, not when the weatherman tells you to with this exterior paint.
DURABLE & PROTECTIVE COATING
Protecting the exterior of your home from rain, sun, snow, dirt, mildew, kids, dogs and the occasional basketball with this exterior paint.
RESISTS FADING, CRACKING & PEELING
This exterior paint resists damage to your finish caused by swings between summer heat, winter cold and anything else Mother Nature has up her sleeve.
INFORMATION
APPLICATION TEMPERATURE
Apply only when air, product, and surface temperatures are between 50°F (10°C) and 90°F (32°C).
SIZES
1 Gal
HOW TO USE THIS EXTERIOR PAINT
Stir thoroughly. Apply to your exterior with a high-quality brush, roller, paint pad, or by spray equipment. When using more than one container of the same exterior paint color, intermix to ensure color uniformity. Do not thin.
BASE
- Medium Base
- Light Base
- Accent Base
DRY TIME
Normally dries to touch in 30 minutes at 77°F (25°C) and 50% relative humidity. Allow four hours before recoating. At 35°F (2°C), dries to touch in three to six hours; allow 24 hours before recoating. Drying times listed may vary depending on temperature, humidity, color, film build, and air movement.
CLEANUP
Clean tools with warm, soapy water.
COVERAGE
One gallon will cover about 300-400 sq ft (28-37 sq. meters) per U.S. gallon (3.78L) on primed, smooth non-porous surfaces. Actual coverage may vary depending on surface texture, porosity and application method. Deeper shades of yellow, orange, pink, red and other colors may require multiple coats. Thinning is not recommended.
FINISH
- Semi-Gloss
- Eggshell
- Flat
AREA PREPARATION
Surface must be clean and dry. Remove all loose, peeling paint, dirt, mildew, grease, oil, chalk, rust, and any other surface contaminants. Blistering and peeling issues are commonly caused by moisture behind the paint film. Problems leading to excessive moisture in the substrate must be repaired prior to painting.
SAFETY
Putty all nail holes and caulk all cracks and open seams. Sand all glossy, rough, and patched surfaces. Stucco, concrete, and masonry surfaces must be completely dry, free of efflorescence, and allowed to cure for 30 days prior to painting. When applied to an uncoated substrate or to bare wood, two coats are required with the first coat acting as the primer.
