Tardigrade ECSL 210 Self Leveling Coating
ECSL 210 SELF LEVELING COATING
TARDIGRADE ECSL 210 SELF LEVELING COATING
Two Component, Solvent Free, Epoxy Based Self Leveling Coating Material
Tardigrade ECSL 210, is a low viscosity, solvent free, two component, self leveling, multi-purpose epoxy based coating.
INFORMATION
ADVANTAGES
- Low viscosity - Ultrahigh bond strength - Solvent free - Excellent penetration ability - Easy application - Gloss finish - Liquid proof - Hygienic and easy to clean - Resistant to mechanical loads, abrasion and chemicals
CHEMICAL STRUCTURE
- Part A: Epoxy Resin
- Part B: Epoxy Hardener
PACKAGING
- Part A: 19,25 kg. net – Part B: 5,75 kg. net
- Total Set: 25 kg. net – Total Set: 27,55 kg. gross
- Part A: 3,85 kg. net – Part B: 1,15 kg. net
- Total Set: 5 kg. net – Total Set: 5,90 kg. gross
FIELDS OF APPLICATION
- On concrete and cement based mineral surfaces
- Wet process areas in food, chemistry and pharmaceutical industries
- Exhibition halls, museums and offices
- Warehousing and assembly areas
- Production areas, factories and workshops
- Shopping malls, sport areas, restaurants
PRODUCTION
Made In Turkey
TYPE
Self Leveling Coating
STORAGE
Store in original sealed containers in dry environment at temperatures between +10⁰C and +30⁰C. Do not put excessive loads on top of the products, which would damage the packaging
SHELF LIFE
12 months from date of production if stored in original unopened containers. Once opened, product should be consumed within one week as it is stored under appropriate storage conditions.
TECHNICAL SPECIFICATIONS
All technical values were calculated based on +23⁰C and 50% relative humidity. Temperature and humidity changes would change technical values.
| PROPERTIES | TECHNICAL VALUES |
|---|---|
| Density | Mixed Resin: 1,35 kg/litre (± %3) |
| Viscosity | Mixed Resin: 1.000-2.000 mPa.s |
| Shore D Hardness | 7 days: 75-85 (ASTM D2240-05) |
| Compressive Strength | 28 days : > 105 N/mm² (ASTM D695-10) |
| Flexural Strength | 7 days: > 40 N/mm² (ASTM D790) |
| Bond Strength | 7 days : > 3 N/mm² (Concrete) (ASTM D7234) |
| Abrasion Strength | 7 days: < 25 mg (CS 10/1000/1000) (ASTM D4060-14) |
| Duration of Use After Mixing | 50 – 70 minutes |
| Total Curing Time | 7 days |
